Loading...
Quick Order

Already know what items you want to order? Enter the SKUs and quantities of the items you wish to order in the form below to add them to your cart.

    Item SKU # Quantity
    The item with this SKU was not found.
    Invalid quantity.
    Processing...

    Setting Tools

    • Cup shaped cutters on wheels used to dress up a setting, ring mounting, or any piece of jewelry by forming a decorative bead or fine row of cuts along the edge. Set in plastic case (sizes 2, 4, 6, 8, 10, 12) plus chuck holding handle

      $79.05 to $87.10


    • American made aluminum pin vise. Often used for holding needle files and various other hand tools

      $2.95

      SKU: PIN-222.00

    • Complete set at an excellent price.

      $9.95

      SKU: PIN-240.00

    • The # 2 Conner Pliers are especially helpful to set or tighten side stones in a basket setting as well as on other type mountings. One side of the pliers has a slot for the wire under the stone and the other side has a beading tool cup on it. Also great for setting earrings! Simply slip the post through the slotted side and bring the beading tool down on the prong making this type of work much quicker and easier. Perfect for setting and tightening accent diamonds surrounding color center stones. Great for earrings, with or without underbezel wires. This plier has the equivalent of a # 20 beading tool tip. If you need a larger tip, you can just use a ball bur to enlarge the size. If you need to make it smaller, just sand down the inside of the jaw. You may need to file the outside tip down to get the cup closer to the edge.

      $14.95

      SKU: PLR-160.00

    • The S style lathe millgrains are wider that the standard lathe millgrain. In addition to this difference, the teeth of the S style are cut more square, while the standard lathe millgrains have a much more rounded edge. The result is a very unique edging.

      $99.95

      SKU: S400

    • Shor lathe millgrain tools are used on a lathe with an SV-12 collect expander and collets to put a millgrain border on the edge of a ring or bracelet. Actual size is 1/2" diameter with an impression of 1.3 mm.

      $99.95

      SKU: CF13

    • Comfortable, palm fitting handle with knurled collet. length 3".

      $9.50

      SKU: 37.767

    • The S style lathe millgrains are wider that the standard lathe millgrain. In addition to this difference, the teeth of the S style are cut more square, while the standard lathe millgrains have a much more rounded edge. The result is a very unique edging.

      $99.95

      SKU: S401

    • Invented by a stone setter, our new Power Setting pliers can be used for setting virtually any size stone. The top (bent) jaw has a concave hole, which works great on prongs or pave set stones. The straight jaw is milled so that the pliers can be used on normal mountings as well as basket mountings and many more. Made of high grade stainless steel with cushion grips, this pliers can save the user a great deal of time when repairing or setting stones. Length is 5-1/2".

      $16.95

      SKU: PLR-165.00

    • Strong and lightweight with box joint and completely enclosed cutter. Chrome plated brass with comfort grip handle.

      $24.55

      SKU: 48.02430

    • Blade only for Large Blade Ring Cutter..

      $9.95

      SKU: PLR-815.05

    • Tube Holding Pliers are made to hold tubing gently but firmly when cutting, filing or doing other operations. Nylon jaws are designed to hold virtually every size tube and will not scratch. Jaws may be replaced. Total length of pliers is 6-1/2" (165mm) long.

      $4.95 to $24.99


    • A double ended clamp with thick leather lined jaws for holding rings and other jewelry pieces securely while filing, polishing, stone setting etc. The tough DuPont material used to make this clamp outlast wood many times over and the molded construction assures perfect alignment of jaws. The wedge supplied is made of the same tough material and can be driven in hard for a tight grip.

      $11.50

      SKU: 48.100

    • Our most popular model. Saws ring while on or off finger. Satin chrome finished metal parts are set in molded plastic handle with comfort grip design.

      $190.00

      SKU: 48.220

    • In an emergency, speed, safety and comfort are essential. Cuts the strongest alloys in less than 10 seconds, safely, without heat or discomfort. This modern system eliminates the old fashioned, lengthy and painful hand turned methods. High quality, powerful, cordless, battery operated (comes with 4 AA batteries). Since it's cordless, you can take it anywhere-- it's ideal in emergencies. The blade guard easily slips under the ring to protect hand and fingers completely. Chrome blade assembly can be sterilized. Comes with 1 year warranty on cutting unit (except blade). The ring cutter of choice for over 90% of all hospital emergency departments.

      $325.00

      SKU: 48.0610

    • Uses standard cordless screwdriver (not included). The unit now includes the traditional *key* which enables the user to turn the blades by hand, plus a new hexagonal shaped key for use with a battery powered screwdriver (not included). This key which fits any standard battery powered screwdriver is made of anodized tempered tool steel and fits into the handle and key perfectly to make the job faster and less painful. Simply unscrew the retainer nut from the standard butterfly key and replace with the hexagonal key - Bingo - it's ready to use with a power screwdriver. Made of the finest quality steel, this cutter will last for a long time. Replacement blades are available.  Not for use with an electric drill
      Use only with an electric screwdriver (a drill will strip the unit's gears and void the warrantee).

      $45.95

      SKU: PLR-814.15

    • Shor lathe millgrain tools are used on a lathe with an SV-12 collect expander and collets to put a millgrain border on the edge of a ring or bracelet. Actual size is 1/2" diameter with an impression of 1.5 mm.

      $99.95

      SKU: CF15

    • For reshaping ends of beading tool punches. Specially hardened steel blocks, perfectly formed and highly polished.

      $38.40 to $174.00


    • Shor lathe millgrain tools are used on a lathe with an SV-12 collect expander and collets to put a millgrain border on the edge of a ring or bracelet. Actual size is 1/2" diameter with an impression of 0.1 mm.

      $99.95

      SKU: HB1

    • Handle only for Shor Knurls

      $69.95

      SKU: KNURLHANDLE

    • Shor lathe millgrain tools are used on a lathe with an SV-12 collect expander and collets to put a millgrain border on the edge of a ring or bracelet. Male tools have a raised bead and leave a beaded imprint on the edge of a ring or bracelet. Actual diameter is 1/4". The millgrain wheels are mounted on 1/8" (3.17 mm) square shanks, with an overall length of 2.5".

      $99.95


    • Knurls are much wider than millgrains (about 10 mm), and give a frosted look. They are used by hand.

      $75.95


      • This Swiss-style miter vise, made of hardened steel, is used for holding wire and sheet up to 11mm wide at both 45° and 90°.
      • A stop bar is included to perform consistent cuts repeatedly.

      $61.95

      SKU: VIS-550.00

      • Bead & Pearl drilling is made easy with this clever vise. 
      • Two brass cupped jaws hold the stone securely and lined up perfectly centered to allow drilling from both sides without breaking or cracking.
      •  The hole is large enough to accept a 1 mm drill bit.  Use with Shor high speed twist drill bits.

      $39.95

      SKU: HOL-178.00

    • Shor lathe millgrain tools are used on a lathe with an SV-12 collect expander and collets to put a millgrain border on the edge of a ring or bracelet. Actual size is 1/2" diameter with an impression of 0.1 mm.

      $99.95

      SKU: K1

    • Shor lathe millgrain tools are used on a lathe with an SV-12 collect expander and collets to put a millgrain border on the edge of a ring or bracelet. Rope tools leave a rope-like effect. Lathe millgrains pictured below are magnified about 6 times actual size. Actual diameter is 1/4". The millgrain wheels are mounted on 1/8" (3.17 mm) square shanks, with an overall length of 2.5".

      $99.95


    • Available in sizes 1-12.

      $11.55


    • Shor lathe millgrain tools are used on a lathe with an SV-12 collect expander and collets to put a millgrain border on the edge of a ring or bracelet. Female tools are indented and leave a imprinted bead. Actual diameter is 1/4". The millgrain wheels are mounted on 1/8" (3.17 mm) square shanks, with an overall length of 2.5".

      $99.95


    • The # 1 Conner Pliers will replace the common beading tool on a great many jobs, making them considerably easier. No longer will you need to hold items in the ring clamp and on the bench pin, or fill a fragile item with shellac. This tool will give you the support from the underside you need to do common, everyday tightening and settings in stones, plus many applications you'll discover as you use this great new tool! Used like a beading tool 50% of the time-faster and easier. Can be used to hold stones (cutlet to table) while being heat set into wax models. This plier has the equivalent of a # 14 beading tool tip on it. If you need a larger tip, you can sand it down slightly and use a ball bur to enlarge the size. If you need to make it small, just sand the outside of the tip slightly.

      $14.95

      SKU: PLR-159.00

    • Curved tips taper to 1/16" for setting small stones. Box joint for alignment. Built in spring. Overall length is 4-1/2".

      $33.50

      SKU: 46.329

    • Ball shaped wood swivel handle fits palm of hand, making it useful for setting, reaming, tapping, millgrain, beading etc. Comes with two chucks. Chucks open from 0-.089". Length 4".

      $26.00

      SKU: 37.769

    • Made to hold three prong "martini" mountings. Each die adapts to the accompanying pin vise. The pin vise holds the mounting in place so that the jeweler can close each prong with a pair of pliers. Fast and easy. Three sizes-small, medium and large. Set comes complete with a pin vise.

      $5.95


      • Jaws are just 1 inch wide!
      • Cast cast iron with heavy enamel coating
      • Made to screw permanently on your bench

      $6.65

      SKU: VIS-215.10

    • One end clamps from the outside for polishing and stone setting, while the other end holds from the inside for total circumference polishing and buffing. Metal construction conducts heat away from ring. Holds ring sizes 1 through 13.

      $26.75

      SKU: 48.105

    • Used to hold rings with vise like grip while polishing. No more burned or blistered fingers from overheated rings. Also helps eliminate buffing wheel "grab". Adjusts to fit most rings.

      $45.00

      SKU: 48.070

    • Cuts titanium and other hard metals.

      $90.65

      SKU: 48.225

    • Quality wood clamp with leather lined jaws for holding rings and other pieces. One side is rounded, the other squared off. Wedge can be driven into either end to close the other jaw tight.

      $8.05

      SKU: 48.125

    • Replacement blade for Economy Ring Cutter.

      $7.00

      SKU: 48.02431

    • These large blade ring cutters are easier to use than traditional ring cutting pliers. Made entirely of stainless steel, the handles are gently curved. The turning handle is large and the blade is a generous 1 3/16" (30.30mm) in diameter for easy cutting. Blades are made of tempered steel and are easily replaced. Total length is 6-1/2 "(170mm).

      $39.95

      SKU: PLR-815.00

    • Natural, close density oilstones with qualities that make them unequalled for sharpening tools like gravers, knives etc.

      $27.90 to $99.75


    • Natural, close density oilstones with qualities that make them unequalled for sharpening tools like gravers, knives etc. Comes with a leather pouch.

      $24.40 to $38.70


    • Wide power range. Great for stone setting, hammering, medium to deep engraving. Stainless steel construction. Set screw chuck holds square tools up to .10" (2.5 mm), round tools up to .13" (3.3 mm) diameter. 4.5" long. Threaded tips only. Includes 1 tip.

      $239.00

      SKU: G04-612

    • Includes two removable standard third hands and 6" square solder board. Sits on a bench or fits BenchMate fixed mounting plate.

      $54.95 to $124.95


    • Saves time by letting you switch from one handpiece to another in seconds. Includes main body and two handpiece connectors. Saves time by letting you switch from one handpiece to another in seconds. Includes main body and two handpiece connectors.

      $29.95

      SKU: G04-615

    • Designed around the engraver and stonesetter's need for power, finesse and control, the GraverMach provides it all in a compact package. The front mounted precision regulator is easy to adjust and use, the combination filter and water trap can be mounted on the machine or remotely for easy access. The dual voltage capability means you can use this machine anywhere in the world just by changing the IEC C13 industry standard power cord. The transformer is rated at 100 - 240 Volts, 50/60 Hz. and carries UL, GS, CE, and LPS certifications. From the first time you power up the GraverMach you will be amazed with its smooth, quiet performance. New porting technology gives your handpiece crisp impact from the low end to the high end. Stroke speed is adjustable from 400 to 8000 strokes per minute, the new front mounted bias valve setting allows the user to tailor the foot throttle feel. The power and air hookups are in the rear of the console and are mounted high to clear the bench top ledge found on many engraving and jewelry work surfaces. The handpiece hookups are now made with quick coupling fittings allowing the GraverMach to work with all your existing GraverMax handpieces. Shipping weight 21 lbs.

      $1,195.00

      SKU: G04-995

    • Superior quality, perfectly tapered and true to size for precision work. All have round handles and are 1-1/2" long.

      $24.90


    • Replacement saw blade for Lightweight Ring Cutter.

      $15.35

      SKU: 48.192

    • Replacement saw blade for Beaver Ring Cutter.

      $29.15

      SKU: 48.224

    • Tool steel collets grip title when screw chuck is tightened. Chromium plated handles are hollow to permit holding of long wires. Body is stepped, with the small portion knurled, so that it can be rotated between fingers. The larger portion is smooth so it can be held precisely in lathes and drill presses.

      $10.40 to $18.35


    •  

      • Lets you hold rings from the inside (like the BenchMate inside ring holder).
      • Works with all GRS engraving blocks and also most vises.
      • Great for stone setting and ring engraving.
      • Works for extra wide rings too (requires an additional collet set so you can double stack the collets).

      $67.95

      SKU: G04-679

    • Engraving Blocks are specially designed for handwork including engraving, jewelry making, wood carving, precision assembly and more.The GRS engraving blocks are very stable yet easily maneuvered while you work.Self-centering jaws have tooling holes that accept a variety of pins and attachments. The top half of each vise rotates smoothly about the center.The spherical bottom sits in a socket ring so you can tilt it in any direction. The GRS MagnaBlock is the largest engraving block and the GRS MicroBlock is the smallest.The MicroBlock's low profile and compact design is especially suited for microscope work and other situations where the size of a larger vise is an obstacle.

      $109.00 to $746.00


    • Can be either clamped or screwed onto bench -Available with either 1-1/2" or 2" jaws.

      $9.45 to $9.95


    •  

      • Holds all popular size pearls securely in position for drilling.
      • Knurled locknuts provide quick clamping and releasing action.

      $9.55

      SKU: 53.0660

    • Economical pin vise with black fluted wood handles and steel chucks.

      $9.30


    • Package of 2.

      $87.10

      SKU: 48.0611

    • With knurled, non-slip handle. Nickel plated, except for saw.

      $56.50

      SKU: 48.180

    • For setting or tightening the prongs on stone set rings. Jaws have been shaped so that they fit over the prongs on a setting. Overall length is 5".

      $17.50

      SKU: 46.346

    • Used to tighten loose prongs or for initial setting of stones. Excellent quality. Overall length is 5".

      $55.00

      SKU: 46.348

    • Easily removes stones from settings while preventing damage. Can be used on all prong settings, bead settings, clusters, channels, fishtails and baguettes. Thin, narrow tips fit into tight recessed areas and very small settings. With box joint for perfect alignment of jaws and cushion grip handles for comfort. Overall length 4-1/2".

      $19.50

      SKU: 46.0059

    • For use with PLR-814.15 and PLR-814.00 only.

      $15.95

      SKU: PLR-814.01

    • Clamps ring securely for filing, sanding and polishing inside of rings.

      $56.25

      SKU: 48.106

    • A set of matched tools that includes the forming block pictured above with corresponding punches that fits each groove on that block. 12 punches in all, including 8 round, 3 square and rectangular and 2 angled punches. Constructed of finely finished, hardened steel and furnished with a wood stand.

      $256.00

      SKU: 190-175

    •  

      • Small dapping block offers 22 depressions ranging from 1/8" to 1".  Both sides shown in pix to left.

      • There are 8 half cylinders on the sides of the block, ranging from 3/16" to 1" and 14 half spheres on front and back ranging in size from 1/8" to 1".     Size 4 x 2-1/2 x 7/8".

      $69.95

      SKU: DAP-114.00

      • Our original design, developed by Shor in the early 1950's, is back!  
      • Back by popular demand, same as the original design, except a PVC coated handle for easy, comfortable grip. 
      •  The thumb lever secures the tube and the groove in one side of the head assures a straight cut every time.
      • Made of tool steel, The handle is PVC coated. Length is 5.5" (140mm).

      $39.95

      SKU: HOL-108.00

      • This tube holder can be attached to the bench or held by a bench vise.
      • Slots at the end assure straight cutting and the guide can be set for multiple cuts when doing production work.

      $36.95

      SKU: HOL-110.00

      • Don't let the economical price fool you.  This tabletop vise is good quality and very functional.
      • 3" jaw title.
      • Jaws have tough rubber lining to prevent scratch of soft metals
      • Wide clamp opening to fit tables up to 21/8" thick.
      • Ball and socket configuration allows the jaws to be tilted and rotated 360°, but holds jaws title at any angle.

      $18.95

      SKU: VIS-350.00

    • A lightweight vise mounted in wood handle. Smooth jaws are 1-1/2" wide and open to 1". Overall length is 6-1/2"

      $13.95

      SKU: 58.130

    • With hollow handle and grooved corrugated jaws that open and close by turning handle. Design allows you to hold long wire pieces not possible with regular hand vise. Jaws open 1/2". Overall length is 4-1/2".

      $30.00

      SKU: 58.0528

    • Made to hold three prong "martini" mountings. Each die adapts to the accompanying pin vise. The pin vise holds the mounting in place so that the jeweler can close each prong with a pair of pliers. Fast and easy. Three sizes- small, medium and large. Set comes complete with a pin vise.

      $20.95

      SKU: HOL-167.00

      • Make it easy for the user to hold tubing or small rods while sawing.
      • This version of the duck billed pliers features a narrow groove down the center of the jaws for the sawblade to follow.
      •  Pliers will hold tubing from 2.0 mm to 10 mm diameter.
      • Length is 7" (175mm).

      $26.95

      SKU: PLR-833.00

    • Offers the user a multi-chuck pin vise that is more comfortable to use than conventional hex head vises. The rounded head fits comfortably into the palm of one's hand making it much easier to drill, ream or twist.

      $4.95

      SKU: PIN-224.00

    • Serrated, grooved, spring action jaws, open and close with large wing nut. Handles are hollow so that long wire will pass through. Jaws open to 1/2". Overall length is 4-1/2".

      $43.00

      SKU: 58.120

    • Serrated, grooved, spring action jaws, open and close with large wing nut. Handles are hollow so that long wire will pass through. Jaws open to 1/2". Overall length is 4-1/2".

      $37.75

      SKU: 58.140

    • Serrated, grooved, spring action jaws, open and close with large wing nut. Handles are hollow so that long wire will pass through. Jaws open to 1/4". Overall length is 4-1/2".

      $40.00

      SKU: 58.141

    • Midget size, hollow handle metal pin vise with screw chuck. Capacity 0-.020". Length 1-3/8"

      $8.20

      SKU: 58.200

    • Steel collet is set into hollow brass handle with screw chuck. Capacity 0-.028". Length 3-3/8"

      $7.00

      SKU: 58.205

    • Different size steel collets are mounted in both ends of the hollow handle. Capacity 0-.099", Length 4-1/2".

      $10.50

      SKU: 58.215

    • Offers the user a multi-chuck pin vise that is more comfortable to use than conventional hex head vises. The rounded head fits comfortably into the palm of one's hand making it much easier to drill, ream or twist. Capacity 0-.125". Length 3-1/2".

      $9.50

      SKU: 58.221

    • With reversible steel collets in each end. Hexagonal heads prevent rolling. Hollow handle and heads made of brass. Capacity 0-.125". Length 4-3/8"

      $8.20

      SKU: 58.240

    • Knurled ring slide forward to close steel jaws, making it easy to operate with one hand. Handle is hollow. Capacity 0-.051". Length 4-3/8"

      $14.95

      SKU: 58.300

      • Jaws are just 11/4 inch wide
      • Revolves for convenient positioning
      • Cast cast iron with heavy enamel coating
      • Made to screw permanently on your bench

      $15.95

      SKU: VIS-310.00

    • Has 2 steel chucks with spare chuck in the end of the hollow brass handle. Will not roll off bench. Capacity 0-.079". Length 3-1/2"

      $10.10

      SKU: 58.250

    • The 4 movable pins accommodate large and small items during engraving or repair. Jaws screw in and out to securely hold items in place. Set of 4 replacement pins come with holder.

      $18.95

      SKU: HOL-166.00

      • Jaws are just 1 inch wide!
      • Cast cast iron with heavy enamel coating
      • Clamps onto bench

      $7.95

      SKU: VIS-214.10

    • Set of 4 Pins for Universal Work Holder

      $2.95

      SKU: HOL-166.04

      • Jaws are just 11/4 inch wide
      • Revolves for convenient positioning
      • Cast cast iron with heavy enamel coating
      • Clamps onto bench

      $16.95

      SKU: VIS-311.00

    • Handy for holding small drills in larger chucks or flex shaft handpieces. With 3/32" shank. 2 collets. Capacity 0-.097"

      $9.75

      SKU: 28.216

    • Pushing handle rotates drill. Length 7-1/2", Capacity 1/16"

      $16.50

      SKU: 28.231

    • Handy for holding small drills in larger chucks or flex shaft handpieces. With 3/32" shank. 1 collet. Capacity 0-.045"

      $6.55

      SKU: 28.215

    • Smooth operating drill with adjustable chuck. Sturdy tool for all around use. Capacity 1/4"

      $23.20

      SKU: 28.233

    • This mini drill press offers excellent control, providing infinitely variable speeds in 3 ranges- low (0-5000 rpm), medium (0-6500 rpm) and high (0-8500 rpm).  The Jacobs chuck spindle accommodates drill shanks up to 6.5 mm.  The platform is on 6-3/4" x 6-3/4" and is die-cast for durability.  This is an IS9001 product and is UL/CE certified.   Comes with a 1 year warrantee.

      The Jacobs chuck spindle accommodates drill shanks up to 6.5 mm.  Maximum drilling diameter in metal is 1/8" and 1/4" in non-metal.  Drilling stroke is 1". The platform is on 6-3/4" x 6-3/4" and is die-cast for durability. 

      This is an IS9001 product and is UL/CE certified.   Comes with a 1 year warrantee. 

      Shipping weight is 10 lbs

      $88.15

      SKU: 28.618

    • Pushing handle rotates drill. Length 4", Capacity 1/32".

      $9.40

      SKU: 28.230

    •                               A precision mechanism with a high power motor, yet compact in size. Includes 6-1/2 mm (1/4") drill chuck and 2 wrenches. Measures 7-1/2 x 9 x 12-1/2".

      Specifications:

      • Spindle tolerance to .02 mm
      • 6.0 mm steel, 6.5 mm non-ferrous metal drilling capacity
      • 260 degree swing.
      • 35 mm maximum vertical spindle stroke.
      • 170 mm maximum distance from table to spindle
      • Handle lever can be fixed on right or left side at any angle
      • Work table measure 5-1/2 mm square
      • Jacobs # 1 main spindle taper
      • 115 V, 50/60 cycle
      • 4 spindle speeds of 2800, 4500, 7100 and 11400 rpm.

      $1,125.00

      SKU: 28.615

    • Length is 3-1/4".

      $1.90 to $12.75


    • This file set includes six different shapes (all cut # 2, 5-1/2") with handles shortened so they conveniently store in the handle. Includes a handy pocket clip and aluminum anodized handle, you can carry these sets anywhere.

      $18.95

      SKU: FIL-663.00

    • Complete set of 12 collet broaches and levers in polished wood case. Designed specifically for watch and clock repair.

      $392.20

      SKU: 30020

    • Pen sized aluminum holder/handle with 3/8" diameter anodized barrel and pocket clip holds 5-1/2" diamond needle files with shortened shanks that are stored in the barrel. Handle has non-slip finger grip surface for positive control. An easy, convenient way to keep files at your finger tips. Five piece set includes flat, 3 square, half round, square and round.

      $19.95

      SKU: FIL-673.00

    • SS drills in a blue anodized 3/8" diameter barrel with pocket clip that prevents rolling. Drills store neatly into the handle, which is well knurled for a perfect grip. All machined parts are rust free aluminum, except for the chuck (which is black oxide tool steel). The chuck is pressed into the barrel so that it cannot turn and opens easily- never binds. The chuck can take drill sizes from size # 80 to size # 52.

      $16.95

      SKU: DRL-245.12

    • This cutter features five sizes ranging from 1/2" to 1". Cut perfect circles every time. The holes have been drilled, reamed and then honed to make the finest cleanest cutter available. the punches are oil-quenched tool steel and drawn for hardness and durability. The bottom base is case-hardened and ground. Cuts metal up to 14 gauge Weight 3 lbs.

      $56.95

      SKU: DAP-410.10