Jeweler's Vises, Jigs & Holders
Grobet Pearl/Bead Drilling Vise
- Holds all popular size pearls securely in position for drilling.
- Knurled locknuts provide quick clamping and releasing action.
$11.15SKU: 53.0660
Precision Pearl/Bead Drilling Vise
- Bead & Pearl drilling is made easy with this clever vise.
- Two brass cupped jaws hold the stone securely and lined up perfectly centered to allow drilling from both sides without breaking or cracking.
- The hole is large enough to accept a 1 mm drill bit. Use with Shor high speed twist drill bits.
$39.95SKU: HOL-178.00
Miter Cutting Vise
- This Swiss-style miter vise, made of hardened steel, is used for holding wire and sheet up to 11mm wide at both 45° and 90°.
- A stop bar is included to perform consistent cuts repeatedly.
$61.95SKU: VIS-550.00
Tube Cutting Jig
- Our original design, developed by Shor in the early 1950's, is back!
- Back by popular demand, same as the original design, except a PVC coated handle for easy, comfortable grip.
- The thumb lever secures the tube and the groove in one side of the head assures a straight cut every time.
- Made of tool steel, The handle is PVC coated. Length is 5.5" (140mm).
$39.95SKU: HOL-108.00
Tube Cutting Holder
- This tube holder can be attached to the bench or held by a bench vise.
- Slots at the end assure straight cutting and the guide can be set for multiple cuts when doing production work.
$36.95SKU: HOL-110.00
Tube Cutting Pliers
- Make it easy for the user to hold tubing or small rods while sawing.
- This version of the duck billed pliers features a narrow groove down the center of the jaws for the sawblade to follow.
- Pliers will hold tubing from 2.0 mm to 10 mm diameter.
- Length is 7" (175mm).
$26.95SKU: PLR-833.00
Tube-Holding Nylon-Jawed Pliers
Tube Holding Pliers are made to hold tubing gently but firmly when cutting, filing or doing other operations. Nylon jaws are designed to hold virtually every size tube and will not scratch. Jaws may be replaced. Total length of pliers is 6-1/2" (165mm) long.
$4.95 to $24.99
Clamp Mini Bench Vise
- Jaws are just 1 inch wide!
- Cast cast iron with heavy enamel coating
- Clamps onto bench
$7.95SKU: VIS-214.10
Mini Bench Vise
- Jaws are just 1 inch wide!
- Cast cast iron with heavy enamel coating
- Made to screw permanently on your bench
$6.65SKU: VIS-215.10
Revolving Clamp Mini Bench Vise
- Jaws are just 11/4 inch wide
- Revolves for convenient positioning
- Cast cast iron with heavy enamel coating
- Clamps onto bench
$16.95SKU: VIS-311.00
Revolving Mini Bench Vise
- Jaws are just 11/4 inch wide
- Revolves for convenient positioning
- Cast cast iron with heavy enamel coating
- Made to screw permanently on your bench
$15.95SKU: VIS-310.00
1-1/2" & 2" Bench Vises
Can be either clamped or screwed onto bench -Available with either 1-1/2" or 2" jaws.$9.45 to $9.95
Tabletop 3" Clamping Swivel Vise
- Don't let the economical price fool you. This tabletop vise is good quality and very functional.
- 3" jaw title.
- Jaws have tough rubber lining to prevent scratch of soft metals
- Wide clamp opening to fit tables up to 21/8" thick.
- Ball and socket configuration allows the jaws to be tilted and rotated 360°, but holds jaws title at any angle.
$18.95SKU: VIS-350.00
Universal Work Holder
The 4 movable pins accommodate large and small items during engraving or repair. Jaws screw in and out to securely hold items in place. Set of 4 replacement pins come with holder.$18.95SKU: HOL-166.00
Set of 4 Pins for Universal Work Holder
Set of 4 Pins for Universal Work Holder$2.95SKU: HOL-166.04
Wood Handled Hand Vise
A lightweight vise mounted in wood handle. Smooth jaws are 1-1/2" wide and open to 1". Overall length is 6-1/2"$15.90SKU: 58.130
Steel Hand Vise, 1-1/2" Wide Jaws
Serrated, grooved, spring action jaws, open and close with large wing nut. Handles are hollow so that long wire will pass through. Jaws open to 1/2". Overall length is 4-1/2".$48.25SKU: 58.120
Steel Hand Vise,1/2" Wide Jaws
Serrated, grooved, spring action jaws, open and close with large wing nut. Handles are hollow so that long wire will pass through. Jaws open to 1/2". Overall length is 4-1/2".$42.40SKU: 58.140
Steel Hand Vise, 5/8" Wide Jaws
Serrated, grooved, spring action jaws, open and close with large wing nut. Handles are hollow so that long wire will pass through. Jaws open to 1/4". Overall length is 4-1/2".$42.40SKU: 58.141
Lowell Pattern Hand Vise
With hollow handle and grooved corrugated jaws that open and close by turning handle. Design allows you to hold long wire pieces not possible with regular hand vise. Jaws open 1/2". Overall length is 4-1/2".$31.80SKU: 58.0528
Martini Holders
Made to hold three prong "martini" mountings. Each die adapts to the accompanying pin vise. The pin vise holds the mounting in place so that the jeweler can close each prong with a pair of pliers. Fast and easy. Three sizes-small, medium and large. Set comes complete with a pin vise.
$5.95
Martini Holders - Set of three (small, medium, and large)
Made to hold three prong "martini" mountings. Each die adapts to the accompanying pin vise. The pin vise holds the mounting in place so that the jeweler can close each prong with a pair of pliers. Fast and easy. Three sizes- small, medium and large. Set comes complete with a pin vise.$20.95SKU: HOL-167.00
Baby Pin Vise
Midget size, hollow handle metal pin vise with screw chuck. Capacity 0-.020". Length 1-3/8"$9.55SKU: 58.200
Double Ended Pin Vise
Different size steel collets are mounted in both ends of the hollow handle. Capacity 0-.099", Length 4-1/2".$11.15SKU: 58.215
Swivel Head Pin Vise
Offers the user a multi-chuck pin vise that is more comfortable to use than conventional hex head vises. The rounded head fits comfortably into the palm of one's hand making it much easier to drill, ream or twist. Capacity 0-.125". Length 3-1/2".$10.10SKU: 58.221
Wood Top Pin Vise
Offers the user a multi-chuck pin vise that is more comfortable to use than conventional hex head vises. The rounded head fits comfortably into the palm of one's hand making it much easier to drill, ream or twist.$4.95SKU: PIN-224.00
Double Ended Pin Vise
With reversible steel collets in each end. Hexagonal heads prevent rolling. Hollow handle and heads made of brass. Capacity 0-.125". Length 4-3/8"$9.55SKU: 58.240
Pin Slide
Knurled ring slide forward to close steel jaws, making it easy to operate with one hand. Handle is hollow. Capacity 0-.051". Length 4-3/8"$17.00SKU: 58.300
Square Chuck Pin Vise
Has 2 steel chucks with spare chuck in the end of the hollow brass handle. Will not roll off bench. Capacity 0-.079". Length 3-1/2"$11.70SKU: 58.250
Brass Handle Pin Vise
Steel collet is set into hollow brass handle with screw chuck. Capacity 0-.028". Length 3-3/8"$7.45SKU: 58.205
Long Handle Pin Vise
Aluminum pin vise/handle features a 1/8″ (3mm) chuck for larger applications. The handle is 5″ long and can be used with needle files and various other hand tools. Capacity: 0 to 3.0mm Chuck: 1/8″ (3mm) Length: 5″$2.95SKU: PIN-222.00
Precision Pin Vises
Tool steel collets grip title when screw chuck is tightened. Chromium plated handles are hollow to permit holding of long wires. Body is stepped, with the small portion knurled, so that it can be rotated between fingers. The larger portion is smooth so it can be held precisely in lathes and drill presses.
$11.70 to $20.70
GRS Engraving Blocks
Engraving Blocks are specially designed for handwork including engraving, jewelry making, wood carving, precision assembly and more.The GRS engraving blocks are very stable yet easily maneuvered while you work.Self-centering jaws have tooling holes that accept a variety of pins and attachments. The top half of each vise rotates smoothly about the center.The spherical bottom sits in a socket ring so you can tilt it in any direction. The GRS MagnaBlock is the largest engraving block and the GRS MicroBlock is the smallest.The MicroBlock's low profile and compact design is especially suited for microscope work and other situations where the size of a larger vise is an obstacle.
$109.00 to $746.00