Loading...
Quick Order

Already know what items you want to order? Enter the SKUs and quantities of the items you wish to order in the form below to add them to your cart.

    Item SKU # Quantity
    The item with this SKU was not found.
    Invalid quantity.
    Processing...

    Dust Collectors

    There are many ways to finish jewelry. Different procedures and equipment result in different finishes, different operational costs, different finishing times, different gold loss factors etc. It is important to get an overall view of the different possibilities and, wherever practical, to experiment with different procedures. For a good perspective, see Shor's web page: Recommended Grinding & Polishing Procedures. For refining of polishing dust, see the Shor web page on the Simplicity Refining System.

    4 Item(s)

    per page

    • Introduced to the jewelry industry by Shor in the 1950's, Shor Whirlwind dust collectors (and copies of them) soon became the only dust collectors that manufacturers wanted to purchase. They are still the standard of the jewelry industry.:

      • Heavy wall sealed cabinets, insures maximum collection efficiency, with minimum vibration and noise.
      • Ultra-fine cotton sateen filter bags collect all solid particles. 
      • Filters dust down to 1 micron (microscopic).
      • Stack silencer standard equipment on all WhirlWind dust collectors.
      • Air inlets on both sides of the dust collector to allow more flexibility in shop arrangements.
      • High suction, low muffled noise levels.
      • High capacity contractor switch built in.
      • Locking brackets on bag door to prevent theft of dust.
      • Expected equipment life- 20+ years.

      Specifications:  Accomodates 1-2 hoods,  400 cfm suction, 9 amps, 120V, dimensions 15" x 141/2" x 21" H

      $884.62

      SKU: DC-800

    • Introduced to the jewelry industry by Shor in the 1950's, Shor Whirlwind dust collectors (and copies of them) soon became the only dust collectors that manufacturers wanted to purchase. They are still the standard of the jewelry industry.:

      • Heavy wall sealed cabinets, insures maximum collection efficiency, with minimum vibration and noise.
      • Ultra-fine cotton sateen filter bags collect all solid particles. 
      • Filters dust down to 1 micron (microscopic).
      • Stack silencer standard equipment on all WhirlWind dust collectors.
      • Air inlets on both sides of the dust collector to allow more flexibility in shop arrangements.
      • High suction, low muffled noise levels.
      • High capacity contractor switch built in.
      • Locking brackets on bag door to prevent theft of dust.
      • Expected equipment life- 20+ years.

      Specifications:  Accomodates 2-4 hoods,  1000 cfm suction, 15 Amps., 120/240 V, dimensions 22"" x 25" x 39" H

      $2,146.15

      SKU: DC-802

    • Introduced to the jewelry industry by Shor in the 1950's, Shor Whirlwind dust collectors (and copies of them) soon became the only dust collectors that manufacturers wanted to purchase. They are still the standard of the jewelry industry.:

      • Heavy wall sealed cabinets, insures maximum collection efficiency, with minimum vibration and noise.
      • Ultra-fine cotton sateen filter bags collect all solid particles. 
      • Filters dust down to 1 micron (microscopic).
      • Stack silencer standard equipment on all WhirlWind dust collectors.
      • Air inlets on both sides of the dust collector to allow more flexibility in shop arrangements.
      • High suction, low muffled noise levels.
      • High capacity contractor switch built in.
      • Locking brackets on bag door to prevent theft of dust.
      • Expected equipment life- 20+ years.

      Specifications:  Accomodates 4-6 hoods,  1300 cfm suction, 15 Amps., 240 V, 3 phase, dimensions 25" x 25" x 77" H

      $3,384.62

      SKU: DC-804

    • Introduced to the jewelry industry by Shor in the 1950's, Shor Whirlwind dust collectors (and copies of them) soon became the only dust collectors that manufacturers wanted to purchase. They are still the standard of the jewelry industry.:

      • Heavy wall sealed cabinets, insures maximum collection efficiency, with minimum vibration and noise.
      • Ultra-fine cotton sateen filter bags collect all solid particles. 
      • Filters dust down to 1 micron (microscopic).
      • Stack silencer standard equipment on all WhirlWind dust collectors.
      • Air inlets on both sides of the dust collector to allow more flexibility in shop arrangements.
      • High suction, low muffled noise levels.
      • High capacity contractor switch built in.
      • Locking brackets on bag door to prevent theft of dust.
      • Expected equipment life- 20+ years.

      Specifications:  Accomodates 6-8 hoods,  2000 cfm suction, 15 Amps., 240 V, 3 phase, dimensions 25" x 25" x 77" H

      $6,615.38

      SKU: DC-806

    4 Item(s)

    per page