Loading...
Quick Order

Already know what items you want to order? Enter the SKUs and quantities of the items you wish to order in the form below to add them to your cart.

    Item SKU # Quantity
    The item with this SKU was not found.
    Invalid quantity.
    Processing...

    Swiss Knife Files, Pippin Files & Slitting Files

    All files are double cut (cross cut) unless otherwise noted.
    • Generally used to file in a slot or wedge shaped opening. Curved knife edge wallows for easily filing in restricted areas. Ideal for filing keyways. Tapered in width and thickness, with the knife edge having the same thickness from point to shoulder. The included angle of the sharp edge is approximately 10-1/2. Top edge is uncut.

      $24.65 to $45.55


    • Overall length 5-1/2". Length of cut 3-1/2".

      $32.75 to $35.20


    • The file of choice by tool and die makers for filing keyways, slots and acute angles. Swiss made. Files available in Bastard Cut (00), 2nd Cut (0), Regular Cut (1), and Smooth Cut (2).

      $8.80 to $25.50


    • Well-made, yet economical. Swiss needle files, made of chrome alloy steel. Cut portion is 3" long. Available inMedium and inFine.

      $65.75 to $73.00


    • Also known as square handled needle files, these precision files have cut length of about 2", and a length of 14 cm.

      $22.75 to $28.60


    • For finishing the junction of 2 different curved surfaces and for opening slots when a "V" shape is required. Combines the characteristics of 3 different files: the cross-sections of a round file with a crossing file, and, along the edge, with a knife file Tapered in width and thickness, with the knife edge having the same thickness from point to shoulder. The included angle of the sharp edge is approximately 10-1/2".

      $66.05 to $98.30


    • Overall length 5-1/2". Length of cut is 3-1/2".

      $56.55 to $61.15


    • Thinner than knife files and used for filing slots. Parallel in width with identical contour on top and bottom.

      $54.30 to $58.30


    • Used for filing slots in small screws. Available in thicknesses ranging from #1 (thickest) to #8 (thinnest). Cut only at the 2 edges (single cut). Available in #1 (.032"), #2 (.028"), #3 (.024"), #4 (.022"), #6 (.018") and #8 (.014").

      $36.10 to $41.75