Loading...
Quick Order

Already know what items you want to order? Enter the SKUs and quantities of the items you wish to order in the form below to add them to your cart.

    Item SKU # Quantity
    The item with this SKU was not found.
    Invalid quantity.
    Processing...

    Swiss 3-Square Files

    All files are double cut (cross cut) unless otherwise noted.
    • Gradually tapered. Cut and usable to the point.

      $19.50 to $36.35


    • Gradually tapered. Cut and usable to the point. Same as 3-square except thinner, for working in small areas. All files have a width of 5/16".

      $26.75 to $28.70


    • For platinum, stainless steel, exotic plastics and other hard to file materials. The hardest surface known
      Rockwell hardness 72HRc. Best performance on hard-to-file surfaces. Cut 0 has blunt end. Cut 2 has pointed end.

      Little or no clogging, a simple knock is enough to remove the chips.Highly resistant to corrosion. Swiss made.

      6" length files have a width of 3/8" and 8" files have a width of 1/2".

      $54.15 to $58.55


    • The three square file is the file of choice by machinists, when filing angles more acute than 90 degrees, for cleaning out corners and filing taps and cutters.This triangular file is taped to the point. It can get into corners other files cannot. Swiss made.

      Files come in Bastard Cut (00),2nd Cut (0), and Smooth Cut (2).

      $5.45 to $31.80


    • Overall length 5-1/2". Length of cut 3-1/2".

      $27.15 to $31.15


    • The Taper Saw file is a triangular, single cut file designed for filing a variety of saws with 60 degree teeth. Tapered toward a point, this file has cut edges for filing gullets between saw teeth. Swiss made. Sold by dozen only.

      $2.65 to $10.65


    • For the "in-between" jobs- bigger than a needle file but smaller than a standard file. Length of cut is 4" with an overall length of 8-1/2".

      $18.10


    • Files are double cut (cross cut).

      $14.00 to $16.90


    • For platinum, stainless steel, exotic plastics and other hard to file materials. The hardest surface known

      Rockwell hardness 72HRc. Best performance on hard-to-file surfaces. Little or no clogging, a simple knock is enough to remove the chips. Highly resistant to corrosion. Swiss made.

      $12.30 to $61.95


    • For platinum, stainless steel, exotic plastics and other hard to file materials. The hardest surface known.
      Rockwell hardness 72HRc. Best performance on hard-to-file surfaces.Little or no clogging, a simple knock is enough to remove the chips.Highly resistant to corrosion. Swiss made.

      $21.15


    • Single cut files, in addition to being much more economical than the standard double cut, have an advantage that they do not clog as easily as double cut files. Cut #4, 14 cm length.

      $5.75

      SKU: 33.865

    • Well made, yet economical, Swiss needle files, made of chrome alloy steel. Cut portion is 3" long.

      $58.60 to $65.75


    • Also known as square handled needle files, these precision files have a length of cut of about 2". Length is 14cm.

      $19.45 to $25.90


    • Also known as square handled needle files, these precision files have a length of cut of about 1-1/2". Length is 14 cm.

      $19.50 to $24.75