Swiss 3-Square Files

All files are double cut (cross cut) unless otherwise noted.

Swiss 3 Square Files

Gradually tapered. Cut and usable to the point. cta.learnMore ›

label.priceFrom $19.50

label.sku	Cut	Length	label.price
31.372	Cut 0	6"	$32.80
31.377	Cut 0	8"	$45.30
31.369	Cut 2	4"	$31.40
31.374	Cut 2	6"	$35.40
31.379	Cut 2	8"	$48.60
31.368	Cut 1	4"	$21.80
31.370	Cut 4	4"	$26.20
31.366	Cut 00	4"	$19.50
31.371	Cut 00	6"	$23.25
31.373	Cut 1	6"	$34.30
31.375	Cut 4	6"	$41.30
31.376	Cut 00	8"	$31.90
31.378	Cut 1	8"	$47.10
31.367	Cut 0	4"	$27.80
cta.showAllOptions

3 Square Slim & Short Swiss Files

Gradually tapered. Cut and usable to the point. Same as 3-square except thinner, for working in small areas. All files have a width of 5/16". cta.learnMore ›

label.priceFrom $26.75

label.sku	Width	Cut	Length	label.price	label.qty
31.382	5/16"	Cut 2	6"	$41.80
31.381	5/16"	Cut 0	6"	$26.75

For platinum, stainless steel, exotic plastics and other hard to file materials. The hardest surface known Rockwell hardness 72HRc. Best performance on hard-to-file surfaces. Cut 0 has blunt end. Cut 2 has pointed end. Little or no clogging, a simple knoc cta.learnMore ›

label.priceFrom $72.40

label.sku	Width	Cut	Length	label.price	label.qty
30.261V	3/8"	Cut 0	6"	$39.85	stockStatus.discontinued
30.264V	1/2"	Cut 0	8"	$72.40
30.265V	1/2"	Cut 2	8"	$78.20
30.262V	3/8"	Cut 2	6"	$42.55	stockStatus.discontinued

American Pattern 3-Square

The three square file is the file of choice by machinists, when filing angles more acute than 90 degrees, for cleaning out corners and filing taps and cutters.This triangular file is taped to the point. It can get into corners other files cannot. Swiss ma cta.learnMore ›

label.priceFrom $97.80

label.sku	Cut	Length	label.bulkQty	label.price
32.45502S	Smooth Cut	4"	12	$118.80
32.455S	Bastard Cut	4"	12	$118.80
32.456S	Bastard Cut	6"	12	$147.00
32.460S	2nd Cut	6"	12	$163.20
32.464S	Smooth Cut	6"	12	$164.40
32.457S	Bastard Cut	8"	12	$174.00
32.461S	2nd Cut	8"	12	$197.40
32.465S	Smooth Cut	8"	12	$207.60
32.458S	Bastard Cut	10"	6	$108.30
32.462S	2nd Cut	10"	6	$117.30
32.466S	Smooth Cut	10"	6	$123.90
32.359	Bastard Cut	12"	12	$97.80
32.463S	2nd Cut	12"	6	$190.80
32.45501S	2nd Cut	4"	12	$118.80
cta.showAllOptions

Die Sinkers' 3-Square

Overall length 5-1/2". Length of cut 3-1/2". cta.learnMore ›

label.priceFrom $27.15

label.sku	Cut	label.price	label.qty
31.441	Cut 2	$31.15
31.440	Cut 0	$27.15

American Pattern Taper Saw, Single Cut

The Taper Saw file is a triangular, single cut file designed for filing a variety of saws with 60 degree teeth. Tapered toward a point, this file has cut edges for filing gullets between saw teeth. Swiss made. Sold by dozen only. cta.learnMore ›

label.priceFrom $45.60

label.sku	Slim	Length	label.bulkQty	label.price
32.439	Slim	5"	12	$48.00
32.440S	Slim	6"	12	$73.80
32.441S	Slim	7"	12	$84.60
32.442S	Slim	8"	12	$101.40
32.443	Slim	9"	6	$51.30
32.445S	Extra Slim	4"	12	$70.20
32.446S	Extra Slim	5"	12	$68.40
32.450s	Double Extra Slim	5"	12	$98.40
32.431S	Regular	4"	12	$63.60
32.433S	Regular	5"	12	$83.40
32.447S	Extra Slim	6"	12	$71.40
32.451S	Double Extra Slim	6"	12	$90.60
32.434S	Regular	7"	12	$101.40
32.448S	Extra Slim	7"	12	$84.60
32.452s	Double Extra Slim	7"	12	$95.40
32.435S	Regular	8"	12	$127.80
32.449S	Extra Slim	8"	12	$101.40
32.453s	Double Extra Slim	8"	12	$109.80
32.436	Regular	8"	6	$45.60
32.438S	Slim	4"	12	$64.20
cta.showAllOptions

Habilis 3-Square Files

For the "in-between" jobs- bigger than a needle file but smaller than a standard file. Length of cut is 4" with an overall length of 8-1/2". cta.learnMore ›

$24.10

label.sku	Width	Cut	label.price	label.qty
33.829	3/8"	Cut 1	$24.10
33.828	3/8"	Cut 0	$24.10

Swiss 3-Square Files with Plastic Handles.

Files are double cut (cross cut). cta.learnMore ›

label.priceFrom $14.00

label.sku	Cut	Length	label.price
30.630	Cut 0	10 cm.	$16.90
30.633	Cut 0	14 cm.	$14.00
30.634	Cut 2	14 cm.	$14.00
30.636	Cut 4	14 cm.	$15.00
30.638	Cut 0	16 cm.	$14.65
30.640	Cut 2	16 cm.	$17.25
30.642	Cut 4	16 cm.	$16.05
30.631	Cut 2	10 cm.	$20.50
cta.showAllOptions

Valtitan 3-Square Needle Files (Knurled Handles)

For platinum, stainless steel, exotic plastics and other hard to file materials. The hardest surface known Rockwell hardness 72HRc. Best performance on hard-to-file surfaces. Little or no clogging, a simple knock is enough to remove the chips. Highly resi cta.learnMore ›

label.priceFrom $198.00

label.sku	Cut	Length	label.bulkQty	label.price
31.633	Cut 0	14 cm.	12	$198.00
31.634	Cut 2	14 cm.	12	$198.00
31.636	Cut 4	14 cm.	12	$213.60
31.638	Cut 0	16 cm.	12	$210.00
31.640	Cut 2	16 cm.	12	$210.00
31.642	Cut 4	16 cm.	12	$231.60
31.643	Cut 6	16 cm.	12	$286.80
31.645	Cut 0	20 cm.	12	$256.80
31.647	Cut 2	20 cm.	12	$256.80
31.649	Cut 4	20 cm.	12	$286.80
31.650	Cut 6	20 cm.	12	$310.80
31.630	Cut 0	10 cm.	12	$267.60
31.631	Cut 2	10 cm.	12	$267.60
cta.showAllOptions

Valtitan 3-Square Needle Files

For platinum, stainless steel, exotic plastics and other hard to file materials. The hardest surface known. Rockwell hardness 72HRc. Best performance on hard-to-file surfaces.Little or no clogging, a simple knock is enough to remove the chips.Highly resis cta.learnMore ›

$28.30

label.sku	Width	Cut	Length	label.price	label.qty
30.113V	5/16"	Cut 0	16 cm	$28.30
30.114V	5/16"	Cut 2	16 cm	$28.30
30.112V	5/16"	Cut 00	16 cm	$21.15	stockStatus.discontinued

Single Cut, 3 Square Needle Files, Cut #4, 14 cm

Single cut files, in addition to being much more economical than the standard double cut, have an advantage that they do not clog as easily as double cut files. cta.learnMore ›