Jeweler's Vises, Jigs & Holders
Grobet Pearl/Bead Drilling Vise
Holds all popular size pearls securely in position for drilling. Knurled locknuts provide quick clamping and releasing action. Learn more ›
$11.15
SKU: 53.0660
Precision Pearl/Bead Drilling Vise
Bead & Pearl drilling is made easy with this clever vise. Two brass cupped jaws hold the stone securely and lined up perfectly centered to allow drilling from both sides without breaking or cracking. The hole is large enough to accept a 1 mm drill bit Learn more ›
$13.95
SKU: HOL-178.00
Miter Cutting Vise
This Swiss-style miter vise, made of hardened steel, is used for holding wire and sheet up to 11mm wide at both 45° and 90°. A stop bar is included to perform consistent cuts repeatedly. Learn more ›
$61.95
SKU: VIS-550.00
Tube Cutting Jig
The thumb lever secures the tube and the groove in one side of the head assures a straight cut every time. Learn more ›
$39.95
SKU: HOL-108.00
Tube Cutting Holder
Slots at the end assure straight cutting and the guide can be set for multiple cuts when doing production work. Learn more ›
$36.95
SKU: HOL-110.00
Tube Cutting Pliers
Make it easy for the user to hold tubing or small rods while sawing. Learn more ›
$26.95
SKU: PLR-833.00
Tube-Holding Nylon-Jawed Pliers
Tube Holding Pliers are made to hold tubing gently but firmly when cutting, filing or doing other operations. Nylon jaws are designed to hold virtually every size tube and will not scratch. Jaws may be replaced. Total length of pliers is 6-1/2" (165mm) lo Learn more ›
From $4.95
| SKU | Type | Price | Qty |
|---|---|---|---|
| PLR-848.05 | Jaws | $4.95 | |
| PLR-848.00 | Pliers | $24.99 | |
Mini Bench Vise
Jaws are just 1 inch wide! Cast cast iron with heavy enamel coating. Made to screw permanently on your bench Learn more ›
$9.95
SKU: VIS-215.10
Revolving Clamp Mini Bench Vise
Revolves for convenient positioning Learn more ›
$18.95
SKU: VIS-311.00
1-1/2" & 2" Bench Vises
Can be either clamped or screwed onto bench -Available with either 1-1/2" or 2" jaws. Learn more ›
From $12.95
| SKU | Jaw Vise | Price | Qty |
|---|---|---|---|
| VIS-204.20 | 2" Jaw Vise | $13.95 | |
| VIS-204.00 | 1-1/2" Jaw Vise | $12.95 | |
Tabletop 3" Clamping Swivel Vise
Ball and socket configuration allows the jaws to be tilted and rotated 360°, but holds jaws title at any angle. Learn more ›
$24.95
SKU: VIS-350.00
Universal Work Holder
The 4 movable pins accommodate large and small items during engraving or repair. Jaws screw in and out to securely hold items in place. Learn more ›
$18.95
SKU: HOL-166.00
Set of 4 Pins for Universal Work Holder
Set of 4 Pins for Universal Work Holder Learn more ›
$2.95
SKU: HOL-166.04
Wood Handled Hand Vise
A lightweight vise mounted in wood handle. Smooth jaws are 1-1/2" wide and open to 1". Learn more ›
$15.90
SKU: 58.130
Steel Hand Vise, 1-1/2" Wide Jaws
Jaws open to 1/2". Overall length is 4-1/2". Learn more ›
$48.25
SKU: 58.120
Steel Hand Vise,1/2" Wide Jaws
Serrated, grooved, spring action jaws, open and close with large wing nut. Learn more ›
$42.40
SKU: 58.140
Steel Hand Vise, 5/8" Wide Jaws
Serrated, grooved, spring action jaws, open and close with large wing nut. Handles are hollow so that long wire will pass through. Learn more ›
$42.40
SKU: 58.141
Lowell Pattern Hand Vise
Design allows you to hold long wire pieces not possible with regular hand vise Learn more ›
$31.80
SKU: 58.0528
Martini Holders
Made to hold three prong "martini" mountings. Each die adapts to the accompanying pin vise. The pin vise holds the mounting in place so that the jeweler can close each prong with a pair of pliers. Fast and easy. Three sizes-small, medium and large. Set co Learn more ›
$5.95
| SKU | Size | Price | Qty |
|---|---|---|---|
| HOL-167.10 | Medium | $5.95 | |
| HOL-167.15 | Large | $5.95 | |
| HOL-167.05 | Small | $5.95 | |
Martini Holders - Set of three (small, medium, and large)
Made to hold three prong "martini" mountings Learn more ›
$20.95
SKU: HOL-167.00
Baby Pin Vise
Midget size, hollow handle metal pin vise with screw chuck. Learn more ›
$9.95
SKU: 58.200
Double Ended Pin Vise
Different size steel collets are mounted in both ends of the hollow handle. Learn more ›
$19.30
SKU: 58.215
Swivel Head Pin Vise
Offers the user a multi-chuck pin vise that is more comfortable to use than conventional hex head vises. Learn more ›
$11.75
SKU: 58.221
Wood Top Pin Vise
Offers the user a multi-chuck pin vise that is more comfortable to use than conventional hex head vises. Learn more ›
$4.95
SKU: PIN-224.00
Wood Handle Pin Vises
Economical pin vise with black fluted wood handles and steel chucks. Learn more ›
$17.15
| SKU | Length (capacity) | Price | Qty |
|---|---|---|---|
| 58.232 | 4-1/2" (0-.059") | $17.15 | |
| 58.231 | 4" (0-.047") | $17.15 | |
Double Ended Pin Vise
With reversible steel collets in each end. Hexagonal heads prevent rolling. Hollow handle and heads made of brass. Learn more ›
$11.10
SKU: 58.240
Pin Slide
Knurled ring slide forward to close steel jaws, making it easy to operate with one hand. Handle is hollow. Learn more ›
$25.70
SKU: 58.300
Square Chuck Pin Vise
Has 2 steel chucks with spare chuck in the end of the hollow brass handle. Learn more ›
$18.20
SKU: 58.250
Brass Handle Pin Vise
Steel collet is set into hollow brass handle with screw chuck. Learn more ›
$11.80
SKU: 58.205
Precision Pin Vises
Tool steel collets grip title when screw chuck is tightened. Chromium plated handles are hollow to permit holding of long wires. Body is stepped, with the small portion knurled, so that it can be rotated between fingers. The larger portion is smooth so it Learn more ›
From $13.60
| SKU | Length (capacity) | Price | Qty |
|---|---|---|---|
| 58.281 | 3-1/2" (0.250"-0.062") | $14.80 | |
| 58.282 | 3-3/8" (0.050"-0.125") | $21.55 | |
| 58.283 | 4-1/2" (0.115"-0.188") | $24.05 | |
| 58.280 | 3" (0.000"-0.040") | $13.60 | |
© 2024 Shor International Corporation & The I. Shor Company. All rights reserved.