Call us at 1-800-295-6320

Quick Order

Already know what items you want to order? Enter the SKUs and quantities of the items you wish to order in the form below to add them to your cart.

    Item SKU # Quantity
    The item with this SKU was not found.
    Invalid quantity.
    Processing...

    Swiss Pillar Files & Checkering Files

    All files are double cut (cross cut) unless otherwise noted.
    • Regular Pillar Files

      Pillar files are rectangular cross cut files. They're thicker (relative to their width) than other flat files and have a cut surface only on top and bottom (not sides). They taper in thickness (thicker at tang and thinner at end). Available in 5 different types of width and edge, cross cut.

      Checkering files are parallel in width and gently tapered in thickness. Overcut is parallel to the file edges and upcut is 90° to overcut. Useful for putting serrations on knife edges and to obtain a checkered design similar to a gun handgrip.

      $17.15 to $54.30


    • Valtitan Regular Pillar Files

      Files have a thickness of 11/64", a width of 1/4" and a length of 6".

      $35.60 to $38.55


    • Demi-Narrow Pillar Files

      Files have a size of 6" x 3/8" x 5/32".

      $40.70 to $54.30


    • Narrow Pillar Files

      Pillar files are rectangular cross cut files. They're thicker (relative to their width) than other flat files and have a cut surface only on top and bottom (not sides). They taper in thickness (thicker at tang and thinner at end). Available in 5 different types of width and edge, cross cut.

      $20.40 to $52.25


    • Extra Narrow Pillar Files

      Pillar files are rectangular cross cut files. They're thicker (relative to their width) than other flat files and have a cut surface only on top and bottom (not sides). They taper in thickness (thicker at tang and thinner at end). Available in 5 different types of width and edge, cross cut.

      $19.25 to $49.50


    • Round Edge Pillar Needle Files

      Length is 16 cm.

      $14.40 to $16.20


    • Checkering Wide Pillar Files

      Pillar files are rectangular cross cut files. They're thicker (relative to their width) than other flat files and have a cut surface only on top and bottom (not sides). They taper in thickness (thicker at tang and thinner at end). Available in 5 different types of width and edge, cross cut.

      $43.50 to $47.90


    • Standard Pillar Checkering Files

      Useful for putting serrations on knife edges and to obtain a checkered design similar to a gun handgrip. Overcut is parallel to the file edges and upcut is 90

      $40.40 to $62.30