Loading...
Quick Order

Already know what items you want to order? Enter the SKUs and quantities of the items you wish to order in the form below to add them to your cart.

    Item SKU # Quantity
    The item with this SKU was not found.
    Invalid quantity.
    Processing...

    Swiss Files - Hand, Equalling & Joint Rd. Edge

    All files are double cut (cross cut) unless otherwise noted.
    • Parallel in width and thickness. All sides cut. Top and bottom are double cut but edges are single cut. Used primarily for filing slots and corners. Files are double cut (cross cut).

      $23.25 to $40.70


    • Parallel in width and thickness. All sides cut. Top and bottom are double cut but edges are single cut. Used primarily for filing slots and corners. Files are double cut (cross cut).

      $27.10 to $38.30


    • For platinum, stainless steel, exotic plastics and other hard to file materials. The hardest surface known
      Rockwell hardness 72HRc. Best performance on hard-to-file surfaces. Little or no clogging, a simple knock is enough to remove the chips. Highly resistant to corrosion. Swiss. All files have length 16cm. Files are double cut (cross cut).

      $20.20


    • Well made, yet economical , Swiss needle files, made of chrome alloy steel. Cut portion is 3" long. Files come in medium (#2) andfine (#4).

      $52.20 to $57.75


    • Well made, yet economical , Swiss needle files, made of chrome alloy steel. Cut portion is 3" long. Cut #4 (fine), 14 cm.

      $5.50

      SKU: 33.860

    • Also known as square handled needle files, these precision files have a length of 14 cm." Files are cross cut (double cut).

      $18.30 to $24.10


    • Parallel in width and tapered in thickness. Only one edge cut. Top and bottom are double cut but edge is single cut. Files are double cut (cross cut).

      $16.35 to $52.20


    • For platinum, stainless steel, exotic plastics and other hard to file materials. The hardest surface known
      Rockwell hardness 72HRc. Best performance on hard-to-file surfaces. Cut 0 has blunt end. Cut 2 has pointed end.

      Little or no clogging, a simple knock is enough to remove the chips. Highly resistant to corrosion. Swiss. 6" files have a width of 1/2" and a thickness of 5/32". 8" files have a width of 29/32" and a thickness of 3/16".

      $32.85 to $51.60


    • The hand file is used primarily for rapid metal removal on sharp corners, shoulders and flat surfaces. Only one edge cut, reducing damage to the workpiece when filing up to a corner. Top and bottom are double cut but edge is single cut. Swiss made. Files are cross cut (double cut).

      $7.35 to $23.40


    • Parallel in width in thickness, with rounded edges, these files are cut on the edges only and the edges are single cut. Cut is number 2. Files are double cut (cross cut).

      $13.90 to $20.10


    • Parallel in width in thickness, with rounded edges, these files are cut on the edges only and the edges are single cut. Cut is number 2. Files are double cut (cross cut).

      $15.60 to $19.20