Loading...
Quick Order

Already know what items you want to order? Enter the SKUs and quantities of the items you wish to order in the form below to add them to your cart.

    Item SKU # Quantity
    The item with this SKU was not found.
    Invalid quantity.
    Processing...

    Grobet & Valtitan Swiss Round Files

    All files are double cut (cross cut) unless otherwise noted.

    13 Item(s)

    per page

    • Gradually tapered and workable to the point. Cut over the entire surface. Used where it is necessary to enlarge a hole or round off a radius. Cuts 00 & 0 have blunt ends. Cuts 1,2 & 4 have pointed ends.

      $13.85 to $39.55


    • For the "in-between" jobs- bigger than a needle file but smaller than a standard file. Length of cut is 4" with an overall length of 8-1/2".

      $19.55


    • For platinum, stainless steel, exotic plastics and other hard to file materials. The hardest surface known
      Rockwell hardness 72HRc. Best performance on hard-to-file surfaces. Cut 0 has blunt end. Cut 2 has pointed end.Little or no clogging, a simple knock is enough to remove the chips. Highly resistant to corrosion. 6" files have a diameter of 1/4", and 8" files have a diameter of 5/16". Swiss made.

      $27.85 to $42.20


    • Used to enlarge holes and round out corners. This double cut file tapers to a point making it adaptable to a variety of hole sizes. Swiss made. Available inBastard Cut (00), 2nd Cut (0) and Smooth Cut (2).

      $4.35 to $21.05


    • Overall length 5-1/2". Length of cut 3-1/2".

      $18.60 to $20.80


    • For platinum, stainless steel, exotic plastics and other hard to file materials. The hardest surface known

      Rockwell hardness 72HRc. Best performance on hard-to-file surfaces. Little or no clogging, a simple knock is enough to remove the chips. Highly resistant to corrosion. Swiss made. Length is 16 cm with a diameter of 5/16".

      $20.10


    • Well-made, yet economical , Swiss needle files, made of chrome alloy steel. Cut portion is 3" long. Length is 14 cm.

      $52.20 to $57.75


    • Also known as square handled needle files, these precision files have a length of cut of about 2". Length is 14cm.

      $16.20 to $17.60


    • Cut over the entire surface.

      $17.60 to $31.80


    • Used for sharpening all sizes of chain saw teeth, this file maintains the proper tooth shape throughout extensive use. The chain saw file user will experience a fast, smooth cutting action, creating an excellent finish. Swiss made. All files are smooth cut.

      $1.50 to $2.15


    13 Item(s)

    per page