Quick Order

Already know what items you want to order? Enter the SKUs and quantities of the items you wish to order in the form below to add them to your cart.

    Item SKU # Quantity
    The item with this SKU was not found.
    Invalid quantity.

    Wire Wrapping, Looping and Jigs

    • Groovy Looping Pliers with 3 Grooves- Make exactly the same size loops every time (in 3 different sizes). The round jaw is smooth with a nice taper. The flat Jaw tapers to the point, so that you can see exactly what you are doing during fabrication. Made of stainless steel with box joint and dual leaf springs.


      SKU: PLR-751.00

    • Problem solved- Make nice right angle bends in wires! One side of the jaw is perfectly straight and the grove at the tip aligns the wire at a perfect 90° angle every time. Groovy pliers can also be used to bend flat pieces at a nice right angle as well, because you will "see" the right angle. Made of stainless steel, these pliers feature ergonomic handles with PVC grips, dual leaf springs and box joint constructions


      SKU: PLR-752.00

    • Excellent companion to our wire wrapping books. Everything you need to get started. Also makes a great gift combined with any of our wire wrapping books. Kit includes 3 lap joint, leaf spring pliers (rd., chain nose, and flat nose), side cutter, aluminum ring mandrel, rawhide mallet, pin vise with 4 interchangeable collets, equaling needle fie, brass gauge, steel ruler and steel scribe.


      SKU: WRK-100.00

    •  Everything needed for the beginner to advanced wire wrapper.  Every item is first quality. 

      This kit includes:

      • Wire gauge
      • Steel ring mandrel
      • Pin vise
      • File, cut # 2
      • Ruler Rawhite mallet
      • Head magnifier
      • Wire wrap mandrels
      • "Moods in Wire" book
      • Cutter
      • Bent nose pliers
      • Chain nose pliers
      • Round nose pliers
      • Brass gauge


      SKU: KIT-500.00

    • Easy to use, fully automatic and hand operated; just put in a straight piece of wire and in seconds you will have an elegant ear wire ready for use. Your customers will appreciate that even your ear wires are now hand made by you. Comes with complete instructions as well as additional instruction sheet for making other wire jewelry components.


      SKU: HOL-100.00

    • A new idea for bead and wire artists. Made of stainless steel with a non-slip PVC handle, this mandrel will give the user consistent size loops time after time. Two sizes are available:

      • MAN-105.00 offers 5 different diameters of 1.5, 2.5, 3.5, 4.5 and 5 mm.
      • MAN-105.10 offers 5 different diameters of 6, 7, 8, 9 and 10 mm.

      Nicely rounded and extremely smooth so wire will not be scratched.

      $8.95 to $9.95

    • Here is truly a revolutionary idea, simple, yet extremely effective, invented and patented by a master jeweler. We call them Wrap and Tap pliers, because the jeweler can wrap ring stock around the barrel shaped jaw, then tap it slightly on a mandrel and instantly make a complete ring, half or quarter shank for repair. Four styles are currently available, 14mm barrel for ladies 1/2 rings and 19mm barrel for gents 1/2 rings and coin mountings, Multi-size Small and Multi-size Large.Pliers are especially good for hollow rings and rings with a design on one side, because the lower jaw is covered with PVC tubing and cannot scratch or mar. You get a perfect circle time after time, with stock up to 2mm thick. You'll get perfect rings every time while saving time at the bench. We think that this is a must for EVERY bench. Made of stainless steel with PVC cushion grips. Compared to other ring, stock, wire and bezel rounding devices that are not as effective, our pliers are modestly priced. Length is 6" for the Ladies and Gents pliers, 6-1/2" for the Multi-size.

      $22.95 to $28.95

    • Looping Pliers for making bails and other patterns in wire are popular, but most only offer the user two loop sizes. These pliers, made of stainless steel offer six different combinations of looping sizes including: 2.0, 3.0, 3.5, 5.5 7.0 & 9.0 mm. Extra handy on the bench for jewelers, beaders or wire artists. Length 6"


      SKU: PLR-736.00

    • A must for wire wrappers, too. It offers a finely tapered nose for coiling, a flat jaw for flattening, straightening or bending, a groove for closing coils and jump rings, plus sidecutter. Has PVC grips and double-leaf springs. Overall length 5".


      SKU: PLR-577.10