Clock & Watch Winders
Key Size Chart
Solves the problem of how to measure the square hole in a clock key. 18 sizes of squares from 1.75 to 6.00 mm, mounted on a metal plate. Permits the fitting of a clock key over the square to obtain the correct key size. Assures accuracy in ordering need keys.$12.50 to $45.14
These scientifically made watch winders look great for the shop or even for home use.The outer box is made of highly polished wood, with a dark lacquered finish.
Both models have a window for easy viewing and a padded lining on the inside so you'll never scratch your watch.Cushions allow for large or regular size. watches.
State-of-the-artmotors have four options for spinning watches using the batteries (not included) or an AC adapter (included).Your automatic watch need never run down again, so no winding, date changing, etc.$97.95 to $129.95
- For loop end mainsprings. Winds up on main wheel and arbor from clock.$14.30
SKU: CM 24752
- Simplifies the problem of placing the clock mainspring into the barrel. The barrel is held in place by a bench vise. The crank handle is used to wind the spring into the barrel. Contains eight barrels ranging from 18 mm to 65 mm. Swiss made$1,575.00
- For winding hole end clock mainsprings. With 3 different size hooked arbors for most spring sizes. Length 4". Used in a bench vise. Swiss made.$330.00
Swiss tools used for winding movements that have two-piece winding stems.$60.80 to $120.00
Wire Loop Pliers
Holds inner coil of mainspring when adjusting or forming to fit the barrel arbor. Stepped nose design, with one round and one concave jaw, allowing smooth looping.
For all available pliers, see: Wire Wrapping, Looping and Jigs.
- Unbreakable mainsprings require a specially designed barrel arbor hook not found on conventional type mainspring winders$1,030.36 to $11,685.00