Loading...
Quick Order

Already know what items you want to order? Enter the SKUs and quantities of the items you wish to order in the form below to add them to your cart.

    Item SKU # Quantity
    The item with this SKU was not found.
    Invalid quantity.
    Processing...

    Millgrains & Beaders

    • Comfortable, palm fitting handle with knurled collet. length 3".

      $9.50

      SKU: 37.767

    • Ball shaped wood swivel handle fits palm of hand, making it useful for setting, reaming, tapping, millgrain, beading etc. Comes with two chucks. Chucks open from 0-.089". Length 4".

      $26.00

      SKU: 37.769

    • For reshaping ends of beading tool punches. Specially hardened steel blocks, perfectly formed and highly polished.

      $38.40 to $174.00


    • Cup shaped cutters on wheels used to dress up a setting, ring mounting, or any piece of jewelry by forming a decorative bead or fine row of cuts along the edge. Set in plastic case (sizes 2, 4, 6, 8, 10, 12) plus chuck holding handle

      $79.05 to $87.10


    • Available in sizes 1-12.

      $11.55


    • Shor lathe millgrain tools are used on a lathe with an SV-12 collect expander and collets to put a millgrain border on the edge of a ring or bracelet. Male tools have a raised bead and leave a beaded imprint on the edge of a ring or bracelet. Actual diameter is 1/4". The millgrain wheels are mounted on 1/8" (3.17 mm) square shanks, with an overall length of 2.5".

      $99.95


    • Shor lathe millgrain tools are used on a lathe with an SV-12 collect expander and collets to put a millgrain border on the edge of a ring or bracelet. Female tools are indented and leave a imprinted bead. Actual diameter is 1/4". The millgrain wheels are mounted on 1/8" (3.17 mm) square shanks, with an overall length of 2.5".

      $99.95


    • Shor lathe millgrain tools are used on a lathe with an SV-12 collect expander and collets to put a millgrain border on the edge of a ring or bracelet. Rope tools leave a rope-like effect. Lathe millgrains pictured below are magnified about 6 times actual size. Actual diameter is 1/4". The millgrain wheels are mounted on 1/8" (3.17 mm) square shanks, with an overall length of 2.5".

      $99.95


    • Shor lathe millgrain tools are used on a lathe with an SV-12 collect expander and collets to put a millgrain border on the edge of a ring or bracelet. Actual size is 1/2" diameter with an impression of 1.5 mm.

      $99.95

      SKU: CF15

    • Shor lathe millgrain tools are used on a lathe with an SV-12 collect expander and collets to put a millgrain border on the edge of a ring or bracelet. Actual size is 1/2" diameter with an impression of 0.1 mm.

      $99.95

      SKU: HB1

    • Shor lathe millgrain tools are used on a lathe with an SV-12 collect expander and collets to put a millgrain border on the edge of a ring or bracelet. Actual size is 1/2" diameter with an impression of 0.1 mm.

      $99.95

      SKU: K1

    • Shor lathe millgrain tools are used on a lathe with an SV-12 collect expander and collets to put a millgrain border on the edge of a ring or bracelet. Actual size is 1/2" diameter with an impression of 1.3 mm.

      $99.95

      SKU: CF13

    • The S style lathe millgrains are wider that the standard lathe millgrain. In addition to this difference, the teeth of the S style are cut more square, while the standard lathe millgrains have a much more rounded edge. The result is a very unique edging.

      $99.95

      SKU: S400

    • The S style lathe millgrains are wider that the standard lathe millgrain. In addition to this difference, the teeth of the S style are cut more square, while the standard lathe millgrains have a much more rounded edge. The result is a very unique edging.

      $99.95

      SKU: S401

    • Knurls are much wider than millgrains (about 10 mm), and give a frosted look. They are used by hand.

      $75.95


    • Handle only for Shor Knurls

      $69.95

      SKU: KNURLHANDLE