Quick Order

Already know what items you want to order? Enter the SKUs and quantities of the items you wish to order in the form below to add them to your cart.

    Item SKU # Quantity
    The item with this SKU was not found.
    Invalid quantity.

    Soldering Fluxes & Thermal Blankets

    • It's the tried and true jewelers' hard soldering flux. Yellow green and self-pickling, it is the best in water based fluxes.Well mixed to eliminate suspension. Good for both hard soldering as well as soft soldering. Use on gold, silver, platinum and other metals with high melting points. Preserves temper and color of metal. The adhesive qualities of this liquid flux hold solder in place.

      $11.70 to $52.50

    • For use in low temperature brazing and silver soldering ferrous and non-ferrous metals. Begins to dissolve oxides at 800 degrees Fahrenheit and is fluid active between 1100 and 1600 F. Contains no fluoride.

      $8.50 to $23.85

    • A quick and clean, creamy paste flux for silver brazing and hard soldering. For use with all jewelers' metals including silver, gold, copper, nickel and platinum. This has been a standard in the jewelry industry for many decades.


    • Requires only that you dip the piece into the Magic Boric and solder-the flux is built right in. No burn-off or waiting to solder. Magic Boric prevents fire scale and will cut your soldering time by as much as 50%. Non-flammable and non-hazardous.


    • For hard soldering with flame. Stays put like a paste. Will not run like a liquid and yet is transparent. Eliminates blind joint soldering. JelFlux produces less oxides and residues, allowing for faster pickling. With no toxic fumes and it's biodegradable.


    • Compact, convenient 4 oz. polyethylene bottle with stainless steel pump action lid. dispenses just the right amount of flux or other liquids. Pump the lid lightly and the fluid is dispensed into the well. the one way pump holds the fluid in the well of the cap, preventing contamination of the unused fluid. For best results and to avoid clogging, the well should be emptied and the cap cleaned between uses. Flux not included.


      SKU: 54.415

    • Spreads quickly and wets the surface completely so alloys flow better. Protects from oxidation while heating and retards discoloration of brazed area. Working temperature range is 1100-1350

      $5.85 to $14.35

    • A non-corrosive flux, harmless to hands or clothing. Washes off with water even after drying. Works with any soft solder. Also see: Tix Solder.


    • Prevents solder from flowing to unwanted areas. Brushes on easily.


    • Protects jewels from heat while soldering. No need to remove jewels from settings (except opals). If flame is used for soldering, the jewel will stay cool. Rinses off in plain water.


    • Protects components under direct 5000 F flame. Not necessary to remove stone before soldering. Prevents oxidation and is odorless and nontoxic. Good for dozens of applications. Washes off with water.


    • So why didn't anyone think of this before. This simple tool is a jeweler's dream for soldering rings when resizing. Just fill the cup with cold water and submerge the stone and mounting while soldering the shank. The stone is kept cool in the water. Simple, effective. Soldering cup includes special sized negative locking tweezers designed to sip on and off the post. This is a tool for virtually every jeweler.


      SKU: SOL-700.00

    • The most time tested anti-flux, used for generations to prevent solder from flowing onto unwanted areas. Simply mix with water or alcohol and brush onto areas you want to mask from the solder.