Grooved work surface disk is 4-1/2" in diameter. Rotates on ball bearings, lazy Susan style, providing 360 degree access. cta.learnMore ›
label.sku: 54.116
Replacement Disk for Rotating Non-Asbestos Soldering Table cta.learnMore ›
label.sku: 54.117
This non-asbestos board measures 4-1/4" x 4-1/4" x 1/2" and takes heat up to 3,200° F. Especially handy for working with platinum. cta.learnMore ›
label.sku: SOL-410.05
Allows positioning of work while annealing or soldering on a heat reflecting material, such as pumice. Rotates on ball bearings, providing 360 degree access. Pan is available in 2 sizes and each comes with 2-1/2 lbs of pumice. cta.learnMore ›
| label.sku | Size | label.price | label.qty |
|---|---|---|---|
| SOL-520.00 | 7" | $34.95 | |
| 54.120 | 12" | $92.00 | |
Replacement Pumice, 2-1/2 lbs cta.learnMore ›
label.sku: 54.122
Mounted on base with swivel to provide the exact position or angle desired. 6" ceramic rod is much cleaner than carbon and holds heat better. Clamp releases rod for replacement. cta.learnMore ›
label.sku: 54.131
For both ceramic and carbon ring stands. cta.learnMore ›
| label.sku | Material | label.price | label.qty |
|---|---|---|---|
| 54.130 | carbon | $19.00 | |
| 54.132 | ceramic | $14.85 | |
Withstands temperatures up to 6,000° F with little or no thermal expansion. Provides a permanent flat surface with very low loss of heat. cta.learnMore ›
label.sku: 54.0965
1/2\" thick, lightweight block reflect heat and perforations hold pins to keep work in place while heating. Withstands heat up to 2000 cta.learnMore ›
| label.sku | Size | label.price | label.qty |
|---|---|---|---|
| 54.216 | 5-1/2" x 7-3/4" | $28.00 | |
| 54.215 | 3-3/4" x 5-1/2" | $14.95 | |
Non-asbestos. Flat one side, with grooves on the other for holding shanks, chains, etc. cta.learnMore ›
label.sku: 54.219
Cordiorite Soldering Board with Rubber Feet 6" x 6" x 1/2" cta.learnMore ›
label.sku: 54.218
Cordiorite Soldering Board with Rubber Feet, 6" x 12" x 1/2" cta.learnMore ›
label.sku: 54.220
Soft, fireproof material into which work or pins can be easily pressed. 6" x 3" x 1-1/2". 2,000° F. cta.learnMore ›
label.sku: 54.186
Ideal for bench protection. Steadying pins can be inserted. withstands temperatures up to 3000 cta.learnMore ›
| label.sku | Size | label.price | label.qty |
|---|---|---|---|
| 54.211 | 6" x 12" x 1/2" | $72.00 | |
| 54.212 | 12" x 12" x 1/2" | $149.00 | |
| 54.210 | 6" x 6" x 1/2" | $64.00 | |
Charcoal soldering blocks cta.learnMore ›
| label.sku | Size | Package | label.price | label.qty |
|---|---|---|---|---|
| 54.151 | 3-1/2" x 2-1/2" x 1-1/2" | Package of 6 | $55.15 | |
| 54.162 | 4-1/2" x 3" x 1-1/2" | Package of 1 | $15.40 | |
| 54.161 | 4-1/2" x 3" x 1-1/2 | Package of 6 | $85.35 | |
| 54.172 | 3-1/2" x 4" x 1-1/2" | Package of 1 | $31.30 | |
| 54.171 | 3-1/2" x 4" x 1-1/2" | Package of 6 | $170.00 | |
| cta.showAllOptions | ||||
Lasts 3-5 times longer than ordinary blocks!!! cta.learnMore ›
label.sku: SOL-480.00
Stainless steel bowl holds workpiece when soldering, leaving both hands free. cta.learnMore ›
label.sku: 54.0720
Just fill the cup with cold water and submerge the stone and mounting while soldering the shank. The stone is kept cool in the water. Simple, effective. cta.learnMore ›
label.sku: SOL-700.00