Motors come with switches and with spindles. Each motor has its own unique spindle and, with only a few exceptions, the spindles from one motor are not interchangeable with any other motor. Most motors are "right hand" (RH). That means the shaft and spin Learn more ›
SKU | Motor | HP | Volts | Phase | Spindle | RH or LH | RH Spindle SKU # | LH Spindle SKU # | Price | Qty |
---|---|---|---|---|---|---|---|---|---|---|
PM-516.001 | WhirlWind | 1/2 | 220 | Single | Threaded | Right Hand | TSR-580 | N/A | $399.00 | |
PM-517 | WhirlWind | 1/2 | 110 | Single | Threaded | Double | TSR-580 | TSL-582 | $499.00 | |
PM-517.001 | WhirlWind | 1/2 | 220 | Single | Threaded | Double | TSR-580 | TSL-582 | $399.00 | |
PM-505 | WhirlWind | 3/4 | 110 | Single | Threaded | Left Hand | N/A | TSL-582 | $499.00 | |
PM-507 | WhirlWind | 3/4 | 110 | Single | Threaded | Right Hand | TSR-580 | N/A | $4,449.00 | |
Show all options |
.For holding 1/2" arbor hole wheels such as large rubber wheels. Learn more ›
SKU | Spindle | Price | Qty |
---|---|---|---|
SCL-542 | LH Spindle | $53.99 | |
SCR-540 | RH Spindle | $38.99 | |
WhirlWind Motor Spindles - Tapered Learn more ›
SKU | Spindle | Price | Qty |
---|---|---|---|
TSL-582 | LH Spindle | $39.00 | |
TSR-580 | RH Spindle | $39.00 | |
SKU | Spindle | Price | Qty |
---|---|---|---|
47.235 | LH Spindle | $50.00 | |
47.234 | RH Spindle | $53.05 | |
Brushes with holes can be threaded onto the hardened steel taper, which in turn can be threaded onto a standard tapered spindle. Handy way to use small setting brushes on a polishing motors. Learn more ›
SKU | Hand | Price | Qty |
---|---|---|---|
47.259 | Left Hand | $6.25 | |
47.258 | Right Hand | $6.25 | |
Heavy duty for right side. 1/16" diameter screw. For holding miniature buffs, felts, brushes etc. Learn more ›
SKU: 47.260
Invented by Shor in the 1950's, this chuck is still an invaluable tool for holding 3/32" shank brushes, stones, burs, tools etc. Fits on any tapered spindle. Learn more ›
SKU: 37.760
Handy for holding small drills in larger chucks or flex shaft handpieces. With 3/32" shank. Learn more ›
SKU: 28.215
Handy for holding small drills in larger chucks or flex shaft handpieces. With 3/32" shank. 2 collets. Learn more ›
SKU: 28.216
Made for use with emery paper. 2-1/2" long with 3/32" shank to fit in handpieces. Priced and sold by the dozen. Learn more ›
SKU | Cut | Price | Qty |
---|---|---|---|
11.309 | Tapered | $16.50 | |
11.308 | Straight | $23.00 | |
Coat with adhesive and roll in abrasive to form 7" polish stick. Has 1/4" arbor hole for tapered spindle mounting. Made from birch. Also used for holding rings when polishing. Learn more ›
SKU: 11.266
Slot hold emery paper so it can be wound around mandrel to desired thickness and secured with rubber band. Learn more ›
SKU: 11.306
High quality steel with 3/32 " shank. For use with snap-on sanding disks. Learn more ›
SKU: 10.740
For applications where high speed or variable speed are required. These machines are like powerful, bench mounted flex shaft machines.
A powerful variable speed bench motor in a compact size suitable for use at the workbench. High torque, 1/6 hp permanently lubricated & sealed magnet motor. Ball bearing, variable speed from 500-7,000 rpm with solid state control. Heavy duty cast iron bas Learn more ›
SKU | Motor | Price | Qty |
---|---|---|---|
M-10932 | BL Motor 220V | $193.99 | |
M-10930 | BL Motor 110V | $193.99 | |
With 1/4" diameter holes and 2 set screws for use on 1/4" shafts. Learn more ›
SKU | Spindle | Price | Qty |
---|---|---|---|
A-TM3 | Tapered Spindle Left Hand | $12.81 | |
A-JCA-1 | Chuck Arbor with Key opens to 5/32" | $52.07 | |
A-WM-6 | Wheel Mandrel Right Hand | $20.76 | |
A-WM-5 | Wheel Mandrel Left Hand | $21.09 | |
A-CHA-1 | Collet Holder 3/32" | $21.00 | |
Show all options |
Is it a flex shaft machine or is it a bench motor? With the Flexade, you can convert your polishing motor into a flex shaft machine. Any standard handpiece (except 25H, 30H, 44H and 9D) can be attached to the flexade. When ordering, be sure to specify th Learn more ›
SKU | Coupling | Sheath | Price | Qty |
---|---|---|---|---|
S.B0-12N | 1/2" | Standard | $67.60 | |
S.B0-38N | 3/8" | Standard | $67.60 | |
S.B0-516N | 5/16 " | Standard | $92.40 | |
S.B0-14 | 1/4" | Neoprene | $75.70 | |
S.B0-12 | 1/2" | Neoprene | $76.17 | |
Show all options |
A new multi-purpose 1/8 hp machine, with variable speeds from 0 to 10,000 RPM. For othermotors, see also: Polishing Motors. Can be used as a carver, grinder, sander, polisher, buffer, etc. Includes, 31" long flexible shaft and handpiece which fits comfor Learn more ›
SKU | Motor | Price | Qty |
---|---|---|---|
47.0807 | Replacement Polishing Wheel | $7.45 | |
47.0216 | Replacement Grinding Wheel | $8.55 | |
47.0215 | Multi-Grinder | $150.00 | |
Made for use with 3M products but adaptable to other large-hole wheels as well. Learn more ›
SKU: 10.3541