Metal Mold Making & Electroforming
- $259.95 to $359.95
- A high grade clear lacquer that can be brushed on articles to provide a tough, smooth, even surface to protect them from tarnish and to eliminate metal deposits from plating solutions. 1 pint bottle. This item is flammable and requires hazmat packaging.$20.55
Used in the process of making metal molds.
Rapid Stone features include:
- Produces detailed artifacts
- Quick set (1 hour)
Why use metal molds? Metal molds give a sharpness of detail that is absolutely impossible to achieve with rubber molds (even when the rubber molds are injected by a vacuum wax injector). In addition, if you are thinking of upgrading to plastic injection, only metal molds can be used. Metal molds are most commonly used for detailed charms, class rings, and wherever razor sharp detail and consistent weight are desirable. Mold to the right is an example of a multi-piece metal mold made over 50 years ago with an old fashioned cylindrical mold frame. Although used for many years, this mold is still as perfect as it was when it was first made.
The following items are required to make metal molds.
The heart of the system (other than the instructions, is the Lok-Blok Mold Frame. This frame can also be used for making excellent rubber molds with no packing. Please note that you may already have many of these items or may wish to purchase some of them (like the lacquer and remover) locally.
.$8.50 to $29.95