Loading...
Quick Order

Already know what items you want to order? Enter the SKUs and quantities of the items you wish to order in the form below to add them to your cart.

    Item SKU # Quantity
    The item with this SKU was not found.
    Invalid quantity.
    Processing...

    End Cutters and Oblique Cutters

    Lightweight & Extra Lightweight

    • For flush cutting wire less than 0.025". Nickel plated with box joint and on-off leaf spring. Will snap cut along cutting edge as well as at tips. Overall length is 4", width of jaws is 7/32".

      $37.10

      SKU: 46.0222

    • Oblique nippers hand made from the highest quality tool steel with long wearing, honed cutting edges that far outlast the ordinary nipper. These miniature oblique nippers will cut spring steel wire up to B & S # 28, as well as soft wires up to B & S # 18. For special or difficult wire cutting problems. Snap cut right to the tips. Straight handles. Width of jaws is 11/16". Made in Switzerland

      $215.00

      SKU: 46.563

    • Lindstrom pliers are world renowned, known by jewelers and craftsmen for consistently high quality. Made in Sweden. Shor's prices on Lindstrom pliers are extremely competitive. High quality, extremely precise and accurate pliers. Specially forged box joint with extra long contact surfaces. Joint moves smoothly for extra precision even at the tip. Box joint also for smaller overall dimensions, improving accessibility in confined areas. With dual spring-loaded handles and comfortable cushion grips, marked with information on pliers' capacity. Lindstrom #7291, Length 4-1/2", Jaw Length .59"

      $72.80

      SKU: 46.201

    • Made in Germany. The Slim-Line series is lightweight and sized for small to miniature work. These are precision pliers with box joints to eliminate side play and maintain alignment of jaws even under stress. The jaws are brightly nickel-plated to resist rust. The handles have vinyl cushion grips and are fitted with leaf springs, which make them particularly suited for repetitive work.

      Flush cutting edges for precision cutting of softer wires. Jaws are set at right angles for getting close to wok. Overall length is 4-1/2", length of cut is 9/16"

      $43.80

      SKU: 46.058

    • Made in Germany. The Slim-Line series is lightweight and sized for small to miniature work. These are precision pliers with box joints to eliminate side play and maintain alignment of jaws even under stress. The jaws are brightly nickel-plated to resist rust. The handles have vinyl cushion grips and are fitted with leaf springs, which make them particularly suited for repetitive work.

      Head is angled with tip coming to a point for getting into tight places. Semi-flush cutting edges are for precision wire cutting of softer wires. Overall length is 4-1/2". length of cut is 9//6".

      $46.90

      SKU: 46.062

    • Box joint construction. Polished heads with double leaf spring return. Plastic grip handles. Overall length is 4-1/2".

      $8.10

      SKU: 46.425

    • Good quality carbon steel work pliers have cushion grip handles . With smooth jaws and polished heads to prevent marring on soft metals. No springs. Overall length is 4-1/2".

      $6.65

      SKU: 46.0190

    • Standard & Heavy Weight End Cutters

    • Made of the finest German steel and induction hardened to a Rockwell hardness of 58, this flush end cutter is unequaled for cutting small sprues as closely as possible. Because it is an end cutter, it offers excellent leverage. This end cutter is the best available. The length is 21.9 mm or .87 in.

      $36.35

      SKU: PLR-784.00

    • Made in Germany. This series is of a weight for medium to small work. These are precision pliers and nipper with box joints to eliminate side play and maintain alignment of jaws even under stress. The heads are brightly polished and the handles have vinyl cushion grips. Jaw edges are beveled to prevent marring. No spring.

      Chain NoseChain Bent Nose

      $31.35 to $46.20


    • Made in Germany. Sturdy full sized pliers have box joint for smooth operation. With leaf spring and cushion grips for comfort. Overall length is 5-1/2" (133 mm). Jaw length is 29/32".. The length for both cutters is 21.9 mm or .87 in.

      $43.30

      SKU: 46.0261

    • Hardened steel cutting jaws make a clean cut with one closing action. The pressure exerted is multiplied many times by the unique linkage design. Little effort is required to complete the job quickly. Overall length is 9-1/2" (241 mm), cutting edge 7/8" (22.2 mm). Made in Switzerland.

      $272.60

      SKU: 64.6496

    • Multi-leverage with return springs in handles. Made in Germany. Heavy duty type cuts up to 3/16" (6.4 mm) rods. Overall length is 7" (203 mm), cutting edge 13/16".

      $82.70

      SKU: 46.574