Call us at 1-800-295-6320

Precision Anvils

  • Steel Bench Block Anvils

    Supports work for flattening and when laying out designs. Case-hardened. Ground flat and smooth.

    $16.00 to $24.05


  • Bench Block Helper w/ Steel & Nylon Blocks

    This three piece set includes a thick vulcanized firm rubber base which absorbs shock, plus a solid steel block which is 15/16" (24mm) thick and 3" (75mm) in diameter. The third piece is a sturdy nylon block the same size that fits into the rubber base for lighter, more delicate work. This is a well made set, and allows one to hammer without creating excess noise and vibration at the bench.

    Size5" x 2ΒΌ"
    Weight2.5 lb

    $28.95

    SKU: DAP-500.30

  • Double Horn Anvils

    For precision work, our miniature horn anvils are drop forged steel, which is then case hardened. Traditional models which have remained popular for years.

    $20.95 to $0.00


  • Very Small Double Horn Anvil

    Slender support bar providing easier access when shaping pieces.

    Size4-1/4" tip to tip, 1" wide, 3-1/2" high
    Weight1 lb

    $24.40

    SKU: 12.306

  • Small Double Horn Anvil on Round Base

    Round base model has one flat and one round horn on cast steel base.

    Size2-3/4" x 4-3/8"
    Weight1.5 lb

    $18.95

    SKU: ANV-220.00

  • Large Double Horn Anvil on Round Base

    A larger version of our excellent bench anvil, this model is about 3 times the weight. It has a highly polished horn and top surface with a 5-3/4" diameter base for greater stability.

    Size5-1/4" x7-3/4"
    Weight4.5 lb

    $39.95

    SKU: ANV-222.00

  • Large Single Horn Anvils

    Made of cast steel, larger anvils are excellent for a variety of uses because of their weight. They make great bench blocks for pounding on metal. Good for applications where lower cost is essential.

    $13.95 to $16.95


  • Slot Anvil

    Used as a base for staking, riveting and drilling small parts. V-slot is handy for removing pinions and similar items. Case hardened and ground flat and smooth. Has 9 graduated holes, one size for stumps and 5 milled slots.

    Size1-3/4" x 1-1/4" x 1/2"
    Weight1 lb

    $21.15

    SKU: 12.315

  • Hexagon Slot Anvil

    Used as a base for staking, riveting and drilling small parts. Case-hardened and ground flat and smooth. Has 16 holes, graduated from 3/64" to 1/2". 5 milled slots.

    Size1-3/8" x 3/4"
    Weight1.5 lb

    $12.95

    SKU: ANV-170.00

  • Brass Ring Stamping Block

    A favorite for almost 50 years, this high quality block secures rings in a rounded cut-out which prevents flat spotting on the shank. Has graduated sizes and shapes on both sides.

    Size1-3/8" x 3/4"
    Weight1 lb.

    $49.95

    SKU: BT-75