Precision Anvils

Anvil Size Weight Stock# Price  
Steel Bench Blocks

Supports work for flattening and when laying out designs. Case-hardened. Ground flat and smooth.

2½" x 2½" x ¾" 1 lb 12.317 Buy $15.20
4"x4"x ¾" 3 lb 12.319 Buy $22.90

Bench Block Helper w/ Steel & Nylon Blocks
  This three piece set includes a thick vulcanized firm rubber base which absorbs shock, plus a solid steel block which is 1516" (24mm) thick and 3" (75mm) in diameter. The third piece is a sturdy nylon block the same size that fits into the rubber base for lighter, more delicate work. This is a well made set, and allows one to hammer without creating excess noise and vibration at the bench. 

5" x 2¼" 2.5 lb DAP-500.30 Buy $28.95
Reversible Double Horn Anvil
 

Machined from a solid block of tool steel.  Case hardened and highly polished.  Riveting hole in top.  Superbly manufactured. Made in Europe.

4½" x 158" H 1 lb 166.00 Buy $25.71
Double Horn Anvils
 
For precision work, our miniature horn anvils are drop forged steel, which is then case hardened.  Traditional models which have remained popular for years. 
1¼" x5¼"  1½ lb ANV-200.00 Buy
(European)
$26.95
1¼" x 4½" 1 lb ANV-205.00 Buy
(Economy)
$20.60
Very Small Double Horn Anvil
 

Slender support bar providing easier access when shaping pieces.

4¼" tip to tip, 1" wide, 3½" high 1 lb 12.306 Buy $23.20  
Small Double Horn Anvil on Round Base
 
Round base model has one flat and one round horn on cast steel base.
 2¾" x 4⅜" 1½ lb ANV-220.00 Buy $18.95
Large Double Horn Anvil on Round Base
 
A larger version of our excellent bench anvil, this model is about 3 times the weight. It has a highly polished horn and top surface with a 5¾" diameter base for greater stability.
5¼" x7¾" 4½ lb ANV-222.00 Buy $39.95
Large Single Horn Anvils
 

Made of cast steel, larger anvils are excellent for a variety of uses because of their weight.  

They make great bench blocks for pounding on metal.  

Good for applications where lower cost is essential.

5½" x2¾" x 2¼" 1½ lb ANV-550.00 Buy $14.00
6½" x3¾" x 2¼" 3½ lb ANV-555.00 Buy $16.95
Slot Anvil
 
Used as a base for staking, riveting and drilling small parts. V-slot is handy for removing pinions and similar items. Case hardened and ground flat and smooth. Has 9 graduated holes, one size for stumps and 5 milled slots. 
1¾" x1¼" x ½" 1 lb 12.315 Buy $20.10
Hexagon Slot Anvil
 
Used as a base for staking, riveting and drilling small parts. Case-hardened and ground flat and smooth. Has 16 holes, graduated from 3/64" to ½". 5 milled slots.   
1⅝" x ¾" 1½ lb ANV-170.00 Buy $12.95
Brass Ring Stamping Block
A favorite for almost 50 years, this high quality block secures rings in a rounded cut-out which prevents flat spotting on the shank. Has graduated sizes and shapes on both sides. 
1⅝" x ¾" 1 lb BT-75 Buy $49.95