ToolHolders, Cutter Guards & Related Parts

Shor Tool Holders

Shor carries a wide variety of different tool holders for horizontal and vertical cutting. Each serves a different purpose. Because of the time it takes to install and align the diamond or carbide tools in the tool holders, faceters leave their tools mounted in tool holders, not removing them unless the tool is worn or damaged. This gives them the ability to change tools in seconds. Multi-tool tool holders make the change even quicker. In addition, multi-tool holders (with the exception of the 6-tool holder) are more economical than single tool holders.

The Shor Horizontal Single Tool Holders are typically 150 mm. However, Shor also stocks them in 100 mm and 60 mm for situations where a faceter will need to make shorter deeper cuts. The Shor Horizontal Adjustable Double Tool Holder is a 150 mm tool holder with a fully adjustable slideway that permits the centering of 2 diamond and/or carbide tools so that they need not be recentered each time the tool holder is changed. This tool holder affords faster changing of tools than single tool holders. And, because of its price, it is much more economical to purchase 1 double tool holder than 2 single tool holders.,

Shor Horizontal Single Tool Holder 95 mm $125

Shor Horizontal Single Tool Holder 140 mm $99
Shor Horizontal Adjustable Double Tool Holder 150 mm $165

The Shor Horizontal Reducing Tool Holder is a single tool holder, 35 mm. This tool holder is used to make the very shortest cuts possible by any means. The circumference of the diamonds spin is the length of the diamond tool. is a single tool holder, 35 mm. This tool holder is used to make the very shortest cuts possible by any means. The circumference of the diamonds spin is the length of the diamond tool.

Shor Horizontal Reducing Tool Holder Adapter, 1 Tool, 35 mm         $795

 

The Shor Horizontal Adjustable Quadruple Tool Holder is a 150 mm tool holder with 4 fully adjustable slideways for very fast changing of up to 4 diamond and/or carbide tools without ever having to remove the tool holder. Aside from the convenience and labor savings, this tool holder is much more economical than either 4 single tool holders or 2 double tool holders. This tool cannot be used with a cutter guard.

Shor Horizontal Adjustable Quadruple Tool Holder, 150 mm         $299

The Shor 6-Tool Horizontal Tool Holder is a 150 mm tool holder that changes tools in a snap, literally. Just turn the dial and a new tool snaps into place. Changing tools with this tool holder is easier and faster than with any other tool holder. is a 150 mm tool holder that changes tools in a snap, literally. Just turn the dial and a new tool snaps into place. Changing tools with this tool holder is easier and faster than with any other tool holder.

Shor 6-Tool Horizontal Tool Holder            150 mm                   $895

The Shor Circumferential ("D" Shaped) Horizontal Tool Holders are a very special kind of tool holder. They spin around the ring or bangle making very long cuts parallel to the surface of the ring. This tool produces very unique cuts and designs that are impossible any other way. Yet is very easy to learn how to use this tool. Within half an hour, you can be trying out new designs.

Shor Circumferential Tool Holder for Rings              $450

Shor Circumferential Tool Holder for Bangles          $450

The Shor B-11 Adjustable Vertical Tool Holder is counterbalanced, can accommodate 1 tool and is adjustable from 0-60 mm for circles, arcs and crescents.

Shor B-11 Adjustable Vertical Tool Holder                 $495

Shor 2-Tool Adjustable Vertical ToolHolders              $990

Posalux Vertical Toolholder
                                         $125

 

 

Mounting Arbors,  Screws & Other Parts
Used for mounting toolholder onto spindles

Toolholder Counterweights $15.00

Toolholder Flathead Screws  
Toolholder Mounting Arbor, Horizontal, Posalux
  Length 60 mm.  Outside thread diameter 22 mm.   Inside thread diameter 9 mm.
$75.00

Toolholder Mounting Arbor, Horizontal, Toudiamont
  Length 62 mm.  Outside thread diameter 11 mm.   Inside thread diameter 10 mm.
$75.00
Toolholder Mounting Arbor, Vertical, Toudiamont
  Length 65 mm.  Outside thread diameter 11 mm.   Groove in shaft.
$75.00
Toolholder Mounting Arbor, Vertical, Posalux
  Length 80 mm.  Inside thread diameter 6 mm. 
$75.00

SV12 Mounting Arbors
  Length 62 mm.  Outside thread diameter 11 mm.   Inside hole diameter 7 mm.

$75.00
Bracelet Expanding Arbor
Length 225 mm
 

Toolholder Mounting Screws $25.00

Toolholders for Diamond Lathes
 
 

Eccentric Pins for Horizontal Toolholders
 

Scopes
  adjustable reticle, European made, right hand
$495.00
  Scope Holders
 
 

 

Tool Holder Cutter Guards,
Shields & Parts

Toolholder Guard 100mm

$200.00

Toolholder Guard Cofacet Horizontal

$200.00

Toolholder Guard Posalux & Moyas

$135.00

Toolholder Guard TD

$275.00

Toolholder Curved Glass Sheild  $45.00
Toolholder Guard Plastic Shields

$25.00

Knobs for Horizontal Cutter Guards, per pair $10.00
Toolholder screws ((short pitch head) $.75
Toolholder screws (long pitch head) $.75
Toolholder screws (flat head) $.75
Toolholder screws (TD) $.75