Here is truly a REVOLUTIONARY idea, simple, yet extremely effective, invented and patented by a master jeweler. We call them Wrap and Tap pliers, because the jeweler can wrap ring stock around the barrel shaped jaw, then tap it slightly on a mandrel and instantly make a complete ring, half or quarter shank for repair. Four styles are currently available, 14mm barrel for ladies' rings and 19mm barrel for gents rings and coin mountings, Multi-size Small and Multi-size Large.   Pliers are especially good for hollow rings and rings with a design on one side, because the lower jaw is covered with PVC tubing and cannot scratch or mar. You get a perfect circle time after time, with stock up to 2mm thick. You'll get perfect rings every time while saving time at the bench. We think that this is a must for EVERY bench. Made of stainless steel with PVC cushion grips. Compared to other ring, stock, wire and bezel rounding devices that are not as effective, our pliers are modestly priced. Length is 6" for the Ladies and Gents pliers, 6¹/2" for the Multi-size.

Multi-Sized Looping Pliers

Looping Pliers for making bails and other patterns in wire are popular, but most only offer the user two loop sizes.  These pliers, made of stainless steel offer six different combinations of looping sizes including: 2.0, 3.0, 3.5, 5.5 7.0 & 9.0 mm.  Extra handy on the bench for jewelers, beaders or wire artists.  Length 6"

Four-in-One Beader's Delight Pliers with Spring

A must for wire wrappers, too.   It offers a finely tapered nose for coiling, a flat jaw for flattening, straightening or bending, a groove for closing coils and jump rings, plus sidecutter.  Has PVC grips and double-leaf springs. Overall length 5".

Groovy Pliers

Groovy Looping Pliers with 3 Grooves-  Make exactly the same size loops every time (in 3 different sizes).  The round jaw is smooth with a nice taper.  The flat Jaw tapers to the point, so that you can see exactly what you are doing during fabrication.  Made of stainless steel with box joint and dual leaf springs.

Chain Nose Groovy Pliers  Problem solved-  Make nice right angle bends in wires!  One side of the jaw is perfectly straight and the grove at the tip aligns the wire at a perfect 90° angle every time.  Groovy pliers can also be used to bend flat pieces at a nice right angle as well, because you will "see" the right angle.  Made of stainless steel, these pliers feature ergonomic handles with PVC grips, dual leaf springs and box joint constructions