E-mail: Fax: (973) 520-8779

About Shor Find Over 20,000 Products  My Cart Place an Order
 

Shor Rolling Mills
Back to:   Silversmithing & Chasing Gateway        Rolling Mills & Drawplates Gateway

Hobbyist Economy Rolling Mill

A compact little rolling mill for the hobbyist or as a small breakdown mill for professionals.  This Indian made mill has four rolls; two 43 mm diameter flat, hardened steel rolls that are 76 mm wide and two wire rolls.  The wire rolls have ½ round and triangular grooves from 1 to 5 mm wide.  There is a 4:1 gear reduction ratio.

190-891 Buy
     Price:   $279.95 		wpe2.jpg (6408 bytes)
Economy Pattern Rolling Mill

Cast iron mill for rolling out sheet and wire. 57 mm with five rolls–two are textures. (Flat, wire, patina and Florentine)

Ship wt. 50 lbs.

mil-280.10 Buy
      Price:   $299.95

wpe2.jpg (5467 bytes)

 

Italian Rolling Mills

These rolling mills are custom made in Italy. Engineered with modern equipment using old world know-how. Years of research and design have gone into making this line of rolling mills. Top quality components, precision machined to close tolerances, combined with expert manufacturing practices assures years of productive and reliable service. 

Hand Operated Italian Rolling Mills
80 mm Wire Rolling Mill 80 mm Combo Rolling Mill 80 mm Flat Rolling Mill
Wire roller width: 80 mm Wire roller width: 42.5 mm / Flat roller width: 37.5 mm Flat roller width: 80 mm
Wire size: .85-3.5 mm Wire size: 1.1-3.5 mm  
Roller diameter: 46.1 mm Roller diameter: 46.1 mm Roller diameter: 46.1 mm
No reduction gear No reduction gear No reduction gear
Weight: 44 lbs (20 kg) Weight: 44 lbs (20 kg) Weight: 44 lbs (20 kg)
28.183 Buy
28.184 Buy
28.182 Buy
Price: $1,292 Price: $1,193 Price: $1,087

 

100 mm Wire Rolling Mill 100 mm Combo Rolling Mill 100 mm Flat Rolling Mill
Wire roller width: 100 mm Wire roller width: 54 mm
Flat roller width: 56 mm		 Flat roller width: 100 mm
Wire size: .85-4.5 mm Wire size: 1-3.9 mm  
Roller diameter: 54 mm Roller diameter: 54 mm Roller diameter: 54 mm
No reduction gear Reduction gear Reduction gear
Weight: 55 lbs (25 kg) Weight: 74 lbs (34 kg) Weight: 74 lbs (34 kg)
28.186 Buy
28.196 Buy
28.194 Buy
Price: $1,398 Price: $1,596 Price: $1,469
  120 mm Combination Flat/Wire Rolling Mill
28.199 Buy
Wire roller width: 58 mm .......Flat roller width: 62 mm
Wire size: 1-4.7 mm
Roller diameter 75 mm
Reduction gear
Weight: 74 lbs (34 kg)
Price: $1,730

 

Bench Top Italian Power Rolling Mills  (shipped by motor freight only)   
All units are 110 volt and are shipped without plugs. A dedicated 20 amp line is required. 110 volt is stocked. 
220 volt is available.

Style Roll Width Roll Diameter Max Opening Wire Speed Stock# Price
Flat 100 mm 54 mm 7 mm   3.95 m/min.
28.205 Buy
 $3,997
Combo 100 mm 54 mm 7 mm 1-3.9 mm 3.95 m/min.
28.206 Buy
 $4,075
Combo 120 mm 75 mm 7 mm 1-4.7 mm 3.95 m/min.
28.207 Buy
 $4,259
Flat & Wire 80 mm 46.1 mm 7 mm .9-3.5 mm 3.95 m/min.
28.200 Buy
 $5,551
Flat & Wire 100 mm 54 mm 7 mm .854.5 mm 3.95 m/min.
28.201 Buy
 $6,159

 

Floor Model Style Italian Power Rolling Mills

 Style Roll Width Roll Diameter Max Opening Wire Speed Stock# Price
Flat & Wire 100 mm 54 mm 7 mm 85-4.5 mm 2.9 m/min. discontinued
Flat & Wire

with Safety Shields

 100 mm 54 mm 7 mm 85-4.5 mm 2.9 m/min. discontinued