 |
 |
|
 |
||
 |
||
|
|
 |
|
|
|
|
|
||
|
||
|
|
|
|
 |
 |
|
|
|
 |
|
Shor Polishing
Motors & Spindles The threaded shaft motors- Back in the 1950's, shortly after Shor developed the modern polishing systems that are the basic designs for all polishing system today, we worked with Baldor to design the threaded shaft motor. Threaded shaft motor spindles run truer than spindles that are tightened with an allen key. Consequently, they run quieter, are easier to polish with, give a better finish and the motors last longer. |
||||||||||||||
|
||||||||||||||
| Motor | HP | Volts | Phase | RH or LH | RPM | Spindle | Motor | Price | RH Spindle | Price | LH Spindle | Price | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| WhirlWind | ½ | 110 | Single | Right Hand | 3450 | Threaded | PM-516 | $299.95 | . | $19.95 | . | . | ||
| Whirlwind | ¾ | 220 | Three | Right Hand | 3450 | Threaded | PM-529 | $299.95 | . | $19.95 | . | . | ||
| WhirlWind | ½ | 110 | Single | Double | 3450 | Threaded | PM-517 | $349.95 | . | $19.95 | . | $19.95 | ||
| WhirlWind | ½ | 110 | Single | Left Hand | 3450 | Threaded | . | $299.95 | . | . | . | $19.95 | ||
| Baldor 2 speed |
¼ | 110 | Single | Double | 3450 1725 |
Tapered | 47.114 | $373.00 | 47.234 | $28.70 | 47.235 | $28.70 | ||
| WhirlWind Motor Spindles | Stock# | Price | |
 |
Flanged Arbor, Right Hand- For holding ½ arbor hole wheels such as large rubber wheels | SCR-540 | $24.95 |
| Flanged Arbor, Left Hand- For holding ½ arbor hole wheels such as large rubber wheels | SCL-542 | $29.95 | |
 |
Rotary File Adapter, Right Hand- For holding rotary files | . | $29.95 |
 |
Tapered Spindle, Right Hand | 28697 | 19.95 |
| Tapered Spindle, Left Hand | 28698 | 19.95 | |
|
Spindle Mandrels- The best place to do polishing is at the polishing motor. That may seem obvious, but most jewelers, when polishing with small brushes, buffs and felts, use their flex shaft machines. Poor control, no torque, dirty and messy (not to mention the loss of gold).a flex shaft is not the ideal way to polish. Spindle mandrels screw onto your tapered spindle and accept all the little brushes, felts, buffs etc. |
||||
| Type | Stock# | Price | ||
|---|---|---|---|---|
 |
Tapered Chuck for Brushes- Brushes with 1/8" holes can be threaded onto the hardened steel taper, which in turn can be threaded onto a standard tapered spindle. Handy way to use small setting brushes on a polishing motors. | Right Hand | 47.258 | $4.00 |
| Left Hand | 47.259 | $4.00 | ||
| Wood Hub Mandrel- Heavy duty for right side. 1/16" diameter screw. For holding miniature buffs, felts, brushes etc. | Right Hand | 47.260 | $2.50 | |
 |
Wood Handy Chuck- Invented by Shor in the 1950's, this chuck is still an invaluable tool for holding 3/32" shank brushes, stones, burs, tools etc. Fits on any tapered spindle. | Right Hand | 37.760 | $6.35 |
 |
Small Adapter Chuck- Handy for holding small drills in larger chucks or flex shaft handpieces. With 3/32" shank. 1 collet. Will fit in Handy Chuck. | 0-.045" | 28.215 | $5.40 |
| Large Adapter Chuck- Handy for holding small drills in larger chucks or flex shaft handpieces. With 3/32" shank. 2 collets. Will fit in Handy Chuck. | 0-.097" | 28.216 | $8.00 | |
| Emery Mandrels | Quantity | Stock# | Price | ||
|---|---|---|---|---|---|
 |
Split Mandrel- Made for use with emery paper. 2¼" long with 3/32" shank to fit in flex shaft handpieces. | Straight | Dozen | 11.308 | $12.99 |
 |
Tapered | Dozen | 11.309 | $12.99 | |
 |
Wood Arbor- Coat with adhesive and roll in abrasive to form 7" polish stick. Has ¼" arbor hole for tapered spindle mounting. Made from birch. Also used for holding rings when polishing. | Dozen | 11.266 | $17.10 | |
| Split Wood Mandrel- Slot hold emery paper so it can be wound around mandrel to desired thickness and secured with rubber band. | Dozen | 11.306 | $17.95 | ||
 |
Snap on Mandrel- High quality steel with 3/32 " shank. For use with snap-on sanding disks. | Each | 10.740 | $2.15 | |
| Foredom Motors- For applications where high speed or variable speed are required. These machines are like powerful, bench mounted flex shaft machines. See also: Flex Shaft Machines, MicroMotors | |||||||||||||||||||||||||||||||||||
 |
BL Motor- A powerful
variable speed bench motor in a compact size suitable for use at the workbench. High
torque, 1/6 hp permanently lubricated & sealed magnet motor. Ball bearing,
variable speed from 1,800-7,000 rpm with solid state control. Heavy duty cast iron base
with 4 mounting holes. Power on/off light in base. 6' grounded power
cord. Comes complete with TM-3 and TM-4 tapered spindles for felts wheels and buffs, a
CHA-4 arbor spindle and a screwdriver.
|
||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||
|
Flexade- Is it a flex shaft
machine or is it a bench motor? With the Flexade, you can convert your polishing
motor into a flex shaft machine. Any standard handpiece (except 25H, 30H, 44H and
9D) can be attached to the flexade. When ordering, be sure to specify the correct stock
number for your motor's shaft.
|
||||||||||||||||||||||||||||||||||
|
3M
Spindle Adaptors & Wheel Adaptors |
|||
| Wheel Hole | Spindle / Arbor | Stock# | Price |
|---|---|---|---|
| ⅜" | Tapered Spindle Mount Adaptor | 10.3541 | $2.95 |
| 1" | ½" Arbor Hole 1"Telescopic | 10.35681 | $5.10 |
|
|
|
|
 |
|
|
The I. Shor Co. |
|
I. Shor Canada |
| Shor International Corporation | |
| Fine Tools, Equipment and
Innovative Products Since 1918 20 Parkway West, Mt. Vernon, N.Y. 10552 Phone (914) 667-1100 Fax (914) 667-0190 |
|
|
e-mail: |
|
Back to 
Polishing Supplies Gateway
