End Cutters and Oblique Cutters
Back to: 
| Lightweight & Extra Lightweight | ||||||||||||||||||
|
Style |
Stock # | Price |
Description |
|||||||||||||||
|
|
|
Slim-Line Oblique Midget Nippers
For flush cutting wire less than 0.025". Nickel plated with box joint and on-off leaf spring. Will snap cut along cutting edge as well as at tips. Overall length is 4", width of jaws is 7⁄32". |
||||||||||||||||
 |
|
Oblique Flush Cut Nippers
Oblique nippers hand made from the highest quality tool steel with long wearing, honed cutting edges that far outlast the ordinary nipper. These miniature oblique nippers will cut spring steel wire up to B & S # 28, as well as soft wires up to B & S # 18. For special or difficult wire cutting problems. Snap cut right to the tips. Straight handles. Width of jaws is 11⁄16". Made in Switzerland |
||||||||||||||||
 |
|
Lindstrom Supreme Series Oblique Cutters
|
||||||||||||||||
 |
|
End Cutters
Flush cutting edges for precision cutting of softer wires. Jaws are set at right angles for getting close to wok. Overall length is 4½", length of cut is 9⁄16" |
Slim-Line Box Joint Precision Plier with Leaf Spring
Made in Germany. The Slim-Line series is lightweight and sized for small to miniature work. These are precision pliers with box joints to eliminate side play and maintain alignment of jaws even under stress. The jaws are brightly nickel-plated to resist rust. The handles have vinyl cushion grips and are fitted with leaf springs, which make them particularly suited for repetitive work. |
|||||||||||||||
|
Oblique Cutters Head is angled with tip coming to a point for getting into tight places. Semi-flush cutting edges are for precision wire cutting of softer wires. Overall length is 4½". length of cut is 9⁄16" | |||||||||||||||||
 |
|
Economy Slim-Line Box Joint Precision End Cutters with Leaf Spring
Box joint construction. Polished heads with double leaf spring return. Plastic grip handles. Overall length is 4½". |
||||||||||||||||
 |
|
Prideline Lap Joint Pliers Good quality carbon steel work pliers have cushion grip handles . With smooth jaws and polished heads to prevent marring on soft metals. No springs. Overall length is 4½". |
||||||||||||||||
|
Style |
Stock # | Price | Description | |||||||||
|
|
|
Flush Cut End Cutter Made of the finest German steel and induction hardened to a Rockwell hardness of 58, this flush end cutter is unequaled for cutting small sprues as closely as possible. Because it is an end cutter, it offers excellent leverage. This end cutter is the best available. The length is 21.9 mm or .87 in. |
||||||||||
 |
|
Jewelers' Series Box Joint Pliers Made in Germany. This series is of a weight for medium to small work. These are precision pliers and nipper with box joints to eliminate side play and maintain alignment of jaws even under stress. The heads are brightly polished and the handles have vinyl cushion grips. No spring. Length of cut ½". |
||||||||||
 |
|
Vigor Standard Size Box Joint Pliers with Leaf Springs Made in Germany. Sturdy full sized pliers have box joint for smooth operation. With leaf spring and cushion grips for comfort. Overall length is 5½" (133 mm). Jaw length is 29⁄32".. The length for both cutters is 21.9 mm or .87 in. |
||||||||||
 |
|
Mesh Bracelet Cutter/Trimmer
Hardened steel cutting jaws make a clean cut with one closing action. The pressure exerted is multiplied many times by the unique linkage design. Little effort is required to complete the job quickly. Overall length is 9½" (241 mm), cutting edge 7⁄8" (22.2 mm). Made in Switzerland. |
||||||||||
 |
|
Multi-Leverage End Cutters
Multi-leverage with return springs in handles. Made in Germany. Heavy duty type cuts up to 3⁄16" (6.4 mm) rods. Overall length is 7" (203 mm), cutting edge 13⁄16". |
||||||||||
