E-mail: Fax: (973) 520-8779

About Shor Find Over 20,000 Products  My Cart Place an Order
 

Grobet & Valtitan Swiss ½ Round Files
All Files are double cut (cross cut) unless otherwise noted

Back to wpe7.jpg (1231 bytes) Files Gateway Page

Half Round
Tapered in width and thickness, coming to a point. Cut on both sides.
Length Width Thickness Cut 00 Price Cut 0 Price Cut 1 Price Cut 2 Price Cut 3 Price Cut 4 Price Cut 6 Price
3" 5/16" 3/32"  
       
31.100 Buy
 $30.50            
4" 15/32" 9/64"
31.102 Buy
 $27.50
31.103 Buy
 $29.00    
31.104 Buy
 32.35
31.106 Buy
 $34.45
31.107 Buy
 $37.85    
5" 33/64" 5/32"            
31.108 Buy
 $35.55            
6" 19/32" 3/16"
31.111 Buy
 $33.40
31.112 Buy
 $35.30
31.113 Buy
 $37.00
31.114 Buy
 $38.10
31.115 Buy
 $40.60
31.116 Buy
 $44.45
31.117 Buy
 $72.70
8" 13/16" 15/64"
31.118 Buy
 $46.05
31.119 Buy
 $48.60
31.120 Buy
 $50.90
31.121 Buy
 $52.55    
31.122 Buy
 $61.35    
10" 1" 19/64"
31.123 Buy
 $63.20
31.124 Buy
 $66.90    
31.125 Buy
 $72.30            

 

Valtitan Half Round Files
For platinum, stainless steel, exotic plastics and other hard to file materials.  The hardest surface known
 Rockwell hardness 72HRc.  Best performance on hard-to-file surfaces. 

 Little or no clogging, a simple knock is enough to remove the chips.  Highly resistant to corrosion.  Swiss.
Cross Section Length Width Thickness Cut 0 Price Cut 2 Price
6" 19/32" 3/16"
30.231V Buy
 $55.25
30.232V Buy
 $59.65
8" 13/16" 15/64"    
30.235V Buy
 $82.25

 

Die Sinkers' ½ Round
Overall length 5½". Length of cut 3½".
Cut 0 Price Cut 2 Price
31.426 Buy
 $19.95
31.427 Buy
 $40.70

 

American Pattern ½ Round
Popular with foundries and machinists.  Material removal is rapid with this file, while leaving a smooth finish.  Used for filing concave, convex and flat surfaces, as well as rounding out holes. Swiss
Cross Section Length Width Thickness Bastard Cut (00) Price per Dz. 2nd Cut (0) Price per Dz. Smooth Cut (2) Price per Dz.
4" 7/16" 1/8"
32.309S Buy
 $115.99
32.317S Buy
 $125.99
32.324S Buy
 $141.99
6" 19/32" 5/32"
32.310S Buy
 $119.99
32.318S Buy
 $135.44
32.325S Buy
 $138.99
8" ½" 7/32"
32.311S Buy
 $142.99
32.319S Buy
 $156.99
32.326S Buy
 $166.99
10" 15/16" 9/32"
32.312S Buy
 $153.99
32.320S Buy
 $187.99
32.327S Buy
 $197.99
12" 11/8" 11/32"
32.313S Buy
 $221.66
32.321S Buy
 $239.99
32.328S Buy
 $251.99
14" 19/32" 13/32"
32.414S Buy
 $294.99
32.322S Buy
 $299.99
32.329S Buy
 $350.99

 

Half Round Ring
Narrower than regular half-round, useful for filing the inside of rings.
Length Width Thickness Cut 00 Price Cut 0 Price Cut 1 Price Cut 2 Price Cut 3 Price Cut 4 Price
6" 15/32" 9/64"
31.127 Buy
 $35.20
31.128 Buy
 37.25
31.129 Buy
 39.00
31.130 Buy
 $40.25
31.131 Buy
 $42.70
31.132 Buy
 $47.00

 

Valtitan Half Round Ring Files
For platinum, stainless steel, exotic plastics and other hard to file materials.  The hardest surface known
 Rockwell hardness 72HRc.  Best performance on hard-to-file surfaces. 

 Little or no clogging, a simple knock is enough to remove the chips.  Highly resistant to corrosion.  Swiss.
Cross Section Length Width Thickness Cut 0 Price Cut 2 Price
6" 15/32" 9/64"
30.241V Buy
 $58.00
30.242V Buy
 $64.30

 

Economy Half Round Ring
With built in handle.
Cross Section Length Width Thickness Cut 0 Price
6" 7/16" 1/8"
33.814 Buy
17.85 Buy

 

Habilis Files
For the "in-between" jobs- bigger than a needle file but smaller than a standard file. Length of cut is 4" with an overall length of 8½".
Cross Section Width Thickness Cut 00 Price Cut 1 Price
15/32" 9/64"
33.822 Buy
 $19.45
33.823 Buy
 $19.45

 

½ Round Needle Files 
Knurled Handles

 
Plastic Handles
Length Cut 0 Price Cut 2 Price Cut 4 Price Cut 6 Price Length Cut 0 Price Cut 2 Price Cut 4 Price
10 cm.
31.516 Buy
 $16.50
31.517 Buy
 $16.50         10 cm.
30.516 Buy
 $18.10
30.517 Buy
 $18.10    
14 cm.
31.519 Buy
 $13.30
31.520 Buy
 $13.30
31.522 Buy
 $14.45     14 cm.
30.519 Buy
 $14.95
30.520 Buy
 $14.95
30.522 Buy
 $16.05
16 cm.
31.525 Buy
 $14.10
31.527 Buy
 $12.80
31.529 Buy
 $15.80
31.530 Buy
 $19.60 16 cm.
30.525 Buy
 $15.80
30.527 Buy
 $15.80
30.529 Buy
 $17.40
20 cm.
31.531 Buy
 $17.50
31.533 Buy
 $17.50
31.535 Buy
 $19.65                  

 

Valtitan ½ Round Needle Files
For platinum, stainless steel, exotic plastics and other hard to file materials.  The hardest surface known
 Rockwell hardness 72HRc.  Best performance on hard-to-file surfaces.  Little or no clogging, a simple knock is enough to remove the chips.  Highly resistant to corrosion.  Swiss.

Length Cut 0 Price Cut 2 Price
18 cm
30.107V Buy
 $22.65
30.108V Buy
 $22.65

 

Economy Half Round Needle Files
Well made, yet economical , Swiss needle files, made of chrome alloy steel.  Cut portion is 3" long.

Length Medium Price per Dz. Fine Price per Dz.
14 cm.
33.886 Buy
 $64.15
33.887 Buy
 $70.90

 

Single Cut Half Round Needle Files
Single cut files, in addition to being much more economical than the standard double cut,  have an advantage that they do not clog as easily as double cut files.

Length Cut 4 (fine) Price
14 cm.
33.862 Buy
 $6.80

 

Marking Needle Files
Similar to ½ round files but uncut on flat surface 
Knurled Handles

 
Plastic Handles
Length Cut 0 Price Cut 2 Price Cut 4 Price Cut 6 Price Length Cut 0 Price Cut 2 Price Cut 4 Price
10 cm.
31.567 Buy
 $15.25
31.568 Buy
 $16.80
31.869 Buy
 $16.80     10 cm.    
30.568 Buy
 $18.45    
14 cm.
31.570 Buy
 $13.20
31.571 Buy
 $13.20
31.572 Buy
 $14.05     14 cm.        
30.572 Buy
 $15.60
16 cm.
31.573 Buy
 $13.70
31.574 Buy
 $13.70
31.575 Buy
 $15.40
31.576 Buy
 $19.10 16 cm.
30.573 Buy
 $15.40
30.574 Buy
 $15.40
30.575 Buy
 $14.55

 

Half Round Escapement Files
Also known as square handled needle files, these precision files have a length of cut of about 2".

Length Cut 0 Price Cut 2 Price Cut 4 Price Cut 6 Price Cut 8 Price
14 cm.
31.724 Buy
 $21.70
31.725 Buy
 $21.75
31.727 Buy
 $23.65
31.728 Buy
 $27.30
31.729 Buy
 $28.80