 |
 |
|
 |
||
 |
||
|
|
 |
|
|
|
|
|
||
|
||
|
|
|
|
 |
 |
|
|
|
 |
Jeweler's Vises, Jigs & Holders
Back
to 
Bench
Tools Gateway 
Ring
Clamps & Cutters
Setting Tools & Holders
See also: Third Hand Tweezers 
Ring
Drilling Quadrant 
Tool Holders
| Pearl/Bead Drilling Vises
Also see Pearl Holding Tweezers
|
Tube & Miter Cutting Vises and
Holders
|
||||||||||||
| Bench Vises |
||||||||||||||||
|
||||||||||||||||
|
||||||||||||||||
| Stock# | Price | |||
|---|---|---|---|---|
 |
Bracelet Holder- Saves time when setting stones, while eliminating the need for messy shellac. Suitable for prong, pave or channel settings on bracelets up to 7 mm (9/32") wide and will not mar or distort. Has space on outer side for clasps. Made of aluminum with diameter of 3½". Hex wrench included. | HOL-122.00 | $24.95 | |
 |
Universal Work Holder-
The 4 movable pins accommodate large and small items during engraving or repair. Jaws screw in and out to securely hold items in place. Set of 4 replacement pins come with holder. |
Holder | HOL-166.00 | $18.95 |
|
Set of 4 Pins |
HOL-166.04 | $2.95 | ||
 |
Wood Handled Hand Vise- A lightweight vise mounted in wood handle. Smooth jaws are 1½" wide and open to 1". Overall length is 6½" | 58.130 | $11.99 | |
| Steel Hand Vise, 1½" Wide Jaws- Has spring action in handle to keep jaws open. Jaws open to 7/16". The insides of the jaws are serrated and are closed by turning wing screw. Overall length is 3½". | 58.120 | $24.95 | ||
| Steel Hand Vise,½" Wide Jaws- Serrated, grooved, spring action jaws, open and close with large wing nut. Handles are hollow so that long wire will pass through. Jaws open to �". Overall length is 4½". | 58.140 | $32.50 | ||
| Steel Hand Vise, 5/8" Wide Jaws- Serrated, grooved, spring action jaws, open and close with large wing nut. Handles are hollow so that long wire will pass through. Jaws open to 1/4". Overall length is 4½". | 58.141 | $32.50 | ||
| Lowell Pattern Hand Vise- With hollow handle and grooved corrugated jaws that open and close by turning handle. Design allows you to hold long wire pieces not possible with regular hand vise. Width of jaws is ½". Overall length is 4½". | 58.0528 | $24.45 | ||
 |
 Martini
HoldersMade to hold three prong "martini" mountings. Each die adapts to the accompanying pin vise. The pin vise holds the mounting in place so that the jeweler can close each prong with a pair of pliers. Fast and easy. Three sizes- small, medium and large. Set comes complete with a pin vise.
|
| Pin Vises | Capacity | Length | Stock# | Price | |
|---|---|---|---|---|---|
 |
Baby Pin Vise- Midget size, hollow handle metal pin vise with screw chuck. | 0-.020" | 13/8" | 58.200 | $6.40 |
 |
Double Ended Pin Vise- Different size steel collets are mounted in both ends of the hollow handle. | 0-.099" | 4½" | 58.215 | $8.50 |
 |
Swivel Head Pin Vise- With large free wheeling head, making it suitable for drilling, tapping, using as a screwdriver, etc. Comes with 2 double ended collets, one in screw chuck and the other stored in handle | 0-.125" | 3½" | 58.221 | $7.40 |
 |
Wood Top Pin Vise- Offers the user a multi-chuck pin vise that is more comfortable to use than conventional hex head vises. The rounded head fits comfortably into the palm of one�s hand making it much easier to drill, ream or twist. |
0-.125" | 4" | PIN..224.00 | $4.99 |
 |
Wood Handle Pin Vises- Economical pin vise with black fluted wood handles and steel chucks. | 0-.047" | 4" | 58.231 | $7.99 |
| 0-.059" | 4½" | 58.232 | $7.99 | ||
 |
Double Ended Pin Vise- With reversible steel collets in each end. Hexagonal heads prevent rolling. Hollow handle and heads made of brass. | 0-.125" | 43/8" | 58.240 | $7.40 |
 |
Pin Slide- Knurled ring slide forward to close steel jaws, making it easy to operate with one hand. Handle is hollow. | 0-.051" | 43/8" | 58.300 | $12.80 |
 |
Square Chuck Pin Vise- Has 2 steel chucks with spare chuck in the end of the hollow brass handle. Will not roll off bench. | 0-.079" | 3½" | 58.250 | $8.65 |
 |
Brass Handle Pin Vise- Steel collet is set into hollow brass handle with screw chuck. | 0-.028" | 33/8" | 58.205 | $5.50 |
 |
Long Handle Pin Vise- American made aluminum pin vise. Often used for holding needle files and various other hand tools | .125-.140" | 5" | PIN-222.00 | $2.25 |
 |
Precision Pin Vises- Tool steel collets grip firmly when screw chuck is tightened. Chromium plated handles are hollow to permit holding of long wires. Body is stepped, with the small portion knurled, so that it can be rotated between fingers. The larger portion is smooth so it can be held precisely in lathes and drill presses. | 0-.040" | 3" | 58.280 | $8.90 |
| 0.25-.062" | 3½" | 58.281 | $9.60 | ||
| .050-.125" | 33/8" | 58.282 | $14.10 | ||
| .115-.188" | 4½" | 58.283 | $15.75 | ||
 |
Set of 4 Pin Vises | 0"-0.188" | 3"-4½" | PIN-240.00 | 29.95 |
|
|
|
|
 |
|
|
The I. Shor Co. |
|
I. Shor Canada |
| Shor International Corporation | |
| Fine Tools, Equipment and
Innovative Products Since 1918 20 Parkway West, Mt. Vernon, N.Y. 10552 Phone (914) 667-1100 Fax (914) 667-0190 |
|
|
e-mail: |
|
