Tweezer Metals:
The chart below shows general property relationships among
the various metals used in the manufacturing of tweezers. In addition,
note that the points of the harder metals will wear longer and are
less subject to bending. The softer metals will not scratch delicate
parts and usually have additional desirable properties such as being
non-magnetic, etc. Titanium has a very high melting temperature and
is commonly used when soldering platinum.
Tweezer Metal
Hardness
Non-Magnetic
Corrosion or Acid Resistance
Carbon Steel
Very Hard
No
Poor
Stainless Steel (SS)
Hard
No
Satisfactory
Titanium
Hard
Yes
Good
Stand Up Cross-Lock Tweezer- Cross-lock tweezer
stands flat to hold work about 1½ off soldering boards leaving
your hands free. Straight serrated tips hold work securely. 6½
long, made of stainless steel.
Stock# TWZ-941.00
Price $3.75
Self-Locking Tungsten Tip Tweezer- ;font-family:TektoMM;mso-fareast-font-family:"Times New Roman";
mso-bidi-font-family:"Times New Roman";mso-ansi-language:EN-US;mso-fareast-language:
EN-US;mso-bidi-language:AR-SA">This new and handy self-locking tweezer offers
tungsten tips, which will not contaminate other metals, including
platinum. Tips are replaceable by the pair. Unit fits nicely onto a
third hand base. Total length is 7½".
Description
Stock#
Price
Tweezer
TWZ-750.00
$38.98
Pr. Replacement Tips
TWZ- 750.02
$7.95
Fiber Grip Self
Locking Tweezers- Heat resistant fiber grips and permanent
tension self locking jaws are ideal for soldering operations or for
holding parts. Stainless steel with long, tapered, non-serrated blunt
jaws. Total Length 6½".
Description
Stock#
Price
Economy Straight
57.0373
$2.75
Economy Curved Tip
57.765
$3.45
Industrial Straight
57.760
$16.10
Industrial Curved Tip
57.761
$15.65
Cross-Lock Reverse
Action Tweezers - Nickel-plated steel, made by Grobet
Inside Holding Ring Soldering Tweezers- Holds
ring from inside shank for easy soldering
48.230
$4.65
Outside Holding Ring Soldering Tweezer-
Stainless steel slide locking tweezer
securely holds the setting and shank in position for easy soldering of
solitaires. One tip is curved to hold shank, the other flat & serrated to
grip setting.
48.235
$43.30
Half-Shank Tweezer- Made specifically
for the difficult task of holding half or quarter shanks in place
while soldering with no fumbling or misalignment. Invented by a
bench jeweler. Made of stainless steel with a steel base, this tool
is good for other applications where a gentle but firm hold is
necessary. Top arm of the tweezer swings out of the way when not
used to hold half or quarter shanks.
Description
Stock#
Price
Tweezer with Base
TWZ-602.00
$19.95
Tweezer Only
TWZ-602.10
$16.95
CoolCup- A
jeweler's dream for soldering rings when resizing. Just fill the cup
with cold water and submerge the stone and mounting while soldering
the shank. The stone stays cool. Simple, but effective. CoolCup
includes specially sized negative locking tweezer designed to slip on
and off the post. This is a tool for virtually every jeweler and at a
price that even the poorest hobbyist can afford.
Stock# SOL700.00 $14.95
Third Hand Tweezers-
Excellent, time-tested method of hands-free holding of work while
soldering. For maximum flexibility, third hand tweezers have one
universal ball joint and one hinge, and double clamp tweezers have
six universal ball joints and 2 hinges.
Style
Stock#
Price
Third Hand Tweezers w/ Round Base- With cross lock
½" tweezers.
54.080
$15.25
Third Hand w/ Horseshoe Base
54.090
$15.25
Double Clamp on Stand with Round Base-Two
Alligator clamps for holding 2 parts simultaneously.
Back
to: 
