 |
 |
|
 |
||
 |
||
|
|
 |
|
|
|
|
|
||
|
||
|
|
|
|
 |
 |
|
|
|
 |
Ring Clamps & Cutters
Back to: 
Bench Tools Gateway
Adhesives
Setting
Gateway
See also: 
Vises,
Jigs & Holders
| Ring Cutters | Stock# | Price | |
 |
Electric Ring Cutter- In an emergency, speed, safety and comfort are essential. Cuts the strongest alloys in less than 10 seconds, safely, without heat or discomfort. This modern system eliminates the old fashioned, lengthy and painful hand turned methods. High quality, powerful, cordless, battery operated (comes with 4 AA batteries). Since it's cordless, you can take it anywhere-- it's ideal in emergencies. The blade guard easily slips under the ring to protect hand and fingers completely. Chrome blade assembly can be sterilized. Comes with 1 year warranty on cutting unit (except blade). | 48.0610 | $263.00 |
| Package of 2 Replacement Blades for Electric Ring Cutter | 48.0611 | $68.15 | |
 |
Electric Ring Cutter- Uses standard cordless screwdriver (not included). The unit now includes the traditional *key* which enables the user to turn the blades by hand, plus a new hexagonal shaped key for use with a battery powered screwdriver (not included). This key which fits any standard battery powered screwdriver is made of anodized tempered tool steel and fits into the handle and key perfectly to make the job faster and less painful. Simply unscrew the retainer nut from the standard butterfly key and replace with the hexagonal key - Bingo - it's ready to use with a power screwdriver. Made of the finest quality steel, this cutter will last for a long time. Replacement blades are available. Not for use with an electric drill- Use only with an electric screwdriver (a drill will strip the unit's gears and void the warrantee). | Cutter PLR-814.15 | $49.95 |
| Blade Only PLR-814.01 |
$9.95 | ||
 |
Large Ring Cutter- These large ring cutters are easier to use than traditional ring cutting pliers. Made entirely of stainless steel, the handles are gently curved. The turning handle is large and the blade is a generous 1 3/16" (30.30mm) in diameter for easy cutting. Blades are made of tempered steel and are easily replaced. Total length is 6½ "(170mm). |
Cutter PLR-815.00 | $39.95 |
| Blade Only PLR-815.05 |
$9.50 | ||
 |
Economy Ring Cutter- Strong and lightweight with box joint and completely enclosed cutter. Chrome plated brass with comfort grip handle. | 48.02430 | $19.99 |
| Replacement Blade for Economy Ring Cutter | 48.02431 | $5.45 | |
| Beaver Ring Cutter- Our most popular model. Saws ring while on or off finger. Satin chrome finished metal parts are set in molded plastic handle with comfort grip design. | 48.220 | $149.95 | |
| Replacement Saw for Beaver Ring Cutter | 48.224 | $22.75 | |
| High Speed Steel Beaver Replacement Saw Blade f/ Cutting Harder Alloys | 48.225 | $70.85 | |
| Lightweight Ring Cutter- With knurled, non-slip handle. Nickel plated, except for saw. | 48.180 | $46.40 | |
| Replacement Saw for Lightweight Ring Cutter | 48.192 | $11.95 | |
| Ring Clamps | |||||||||||||||
|
|
Large Head
Ring Clamp w/Metal Holder-
This combination of holder and ring clamp enables the user to work faster, with less fatigue to the left arm and back because the metal fork supports the ring clamp. No pushing up from the bottom. Includes same large head clamp as above.
Clamp w/Holder Stock# RCL-653.00 Price $15.95 |
||||||||||||||
|
|
Swiss Style Ring Clamp w/
Custom Bench Pin-
Made primarily of blue anodized aluminum and has a custom fit bench pin available for maximum versatility. the jaws are leather lined (the preferred material for holding rings). The handle features a cushion grip with excellent properties. It is very slip resistant but not too soft. The jaws are "pulled" close by the knob (located at the lower end, which cannot slip as conventional wooden ring clamps do. Max opening is just of ¼" and length is 6¾".
|
||||||||||||||
 |
Wood Ring Clamp- Quality wood clamp with leather lined jaws for holding rings and other pieces. One side is rounded, the other squared off. Wedge can be driven into either end to close the other jaw tight. | 48.125 | $6.20 | ||||||||||||
| Plastic Ring Clamp- a Double ended clamp with thick leather lined jaws for holding rings and other jewelry pieces securely while filing, polishing, stone setting etc. The tough DuPont material used to make this clamp outlast wood many times over and the molded construction assures perfect alignment of jaws. The wedge supplied is made of the same tough material and can be driven in hard for a tight grip. | 48.100 | $9.40 | |||||||||||||
 |
Ring Gripper- Used to hold rings with vise like grip while polishing. No more burned or blistered fingers from overheated rings. Also helps eliminate buffing wheel "grab". Adjusts to fit most rings. | 48.070 | $40.95 | ||||||||||||
|
|
Mar Proof Holder- This useful ring holder has 7 nylon inserts to hold rings (sizes 6-12) for setting, polishing and finishing. Rings can be rotated or locked into place. | BP-503 | $40.95 | ||||||||||||
 |
Metal Ring Clamp- One end clamps from the outside for polishing and stone setting, while the other end holds from the inside for total circumference polishing and buffing. Metal construction conducts heat away from ring. Holds ring sizes 1 through 13. | 48.105 | $15.95 | ||||||||||||
| External Metal Ring Clamp- Clamps ring securely for filing, sanding and polishing inside of rings | 48.106 | $24.50 | |||||||||||||
Back to:
Pliers
Gateway See
also: 
Xuron
Ring Cutting Plier
|
|
|
|
 |
|
|
The I. Shor Co. |
|
I. Shor Canada |
| Shor International Corporation | |
| Fine Tools, Equipment and
Innovative Products Since 1918 20 Parkway West, Mt. Vernon, N.Y. 10552 Phone (914) 667-1100 Fax (914) 667-0190 |
|
|
e-mail: |
|
