Millgrains, Beaders and Knurls- Texturing and setting tools for jewelers.




	E-mail:	Fax: (973) 520-8779

Welcome, Guest! View My Cart or Checkout.

Millgrains & Beaders
Back to Bench Tools Gateway         Setting Tools Gateway

Millgrain & Beader Handles Stock# Price

Standard Handle-
Comfortable, palm fitting handle with knurled collet. length 3".
37.767
$7.70

Swivel Tool Handle-
Ball shaped wood swivel handle fits palm of hand, making it useful for setting, reaming, tapping, millgrain, beading etc. Comes with two chucks. Chucks open from 0-.089
Add to Cart ". Length 4".
37.769
$20.99

Swiss Beader Sets- Used to form beads that hold diamonds and other stones in settings. Also used for tightening loose stones. Sets come in protective plastic organizer case and include a handle.
Set of 23 pieces plus handle     Stock# 53.160
       Price $31.75
Set of 12 pieces plus handle    Stock# 53.16001
    Price $22.50

Individual Beaders $.94 Each

Size 0 1 2 3 4 5 6 7 8 9 10 11

Stock# 53.161
53.162
53.163
53.164
53.165
53.166
53.167
53.168
53.169
53.170
53.171
53.172

Size 12 13 14 15 16 17 18 19 20 21 22

Stock# 53.173
53.174
53.175
53.176
53.177
53.178
53.179
53.180
53.181
53.182
53.183

Swiss Beading Blocks- For reshaping ends of beading tool punches. Specially hardened steel blocks, perfectly formed and highly polished.

Size Stock# Price

12 Hole Round 53.013
$31.50

40 Hole Flat 53.0153
$127.25

Hand Millgrain Tools-

Cup shaped cutters on wheels used to dress up a setting, ring mounting, or any piece of jewelry by forming a decorative bead or fine row of cuts along the edge.

Set in plastic case (sizes 2, 4, 6, 8, 10, 12) plus chuck holding handle Stock # 53.0210
$75.00

Set in hardwood stand (sizes 1-6) plus chuck holding handle Stock # 53.100
$71.85

Individual Millgrains      $10.45 Each

Size 1 2 3 4 5 6 7 8 9 10 11 12

Stock# 53.101
53.102
53.103
53.104
53.105
53.106
53.107
53.108
53.109
53.110
53.111
53.112

wpe4.jpg (2772 bytes)
Lathe Millgrains- Shor lathe millgrain tools are used on a lathe with an SV-12 collect expander and collets to put a millgrain border on the edge of a ring or bracelet. Male tools have a raised bead and leave a beaded imprint on the edge of a ring or bracelet. Female tools are indented and leave a imprinted bead. Rope tools leave a rope like effect. Lathe millgrains pictured below are magnified about 6 times actual size.

See picture to the left (showing lathe millgrain, ring, SV-12 collet expander & collet) for proper size perspective.

Pricing   $99.95 each

½" Lathe Millgrains "S" Style ½" Lathe Millgrains Posalux Tool Mtd. Millgrains

$99.95 $99.95 $99.95

Stock# M4 M6 M8 M9 M10 M12 M14

Pix

Name Male Lathe Millgrains

Stock# F4 F6 F8 F9 F10 F12 F14

Pix

Name Female Lathe Millgrains

Stock# R1 R2 R3 CF15 HB1 K1 CF13

Pix

Name Rope Lathe Millgrains Raised Bead Herringbone Knurl Florentine Dia.

Posalux Millgrains
Available in all types of millgrains. Same as the std. lathe millgrains but mounted in a Posalux type tool holder so that millgraining can be done in a faceting machine instead of a lathe.

S 400
½" diameter

The S style lathe millgrains are wider that the standard lathe millgrain. In addition to this difference, the teeth of the S style are cut more square, while the standard lathe millgrains have a much more rounded edge. The result is a very unique edging.

The comparison photo above shows an S-400 millgrain on top and a ½" diameter M10 lathe millgrain on the bottom).

S 401
½" diameter (finer teeth)

See also: Lathe Channel Setting Tools

Knurls- Knurls are much wider than millgrains (about 10 mm), and give a frosted look. They are used by hand.

Sizes Available Price

# 1- Fine finish
Stock # KNURL1
# 2- Coarse finish
Stock # KNURL2
$75.95

Handle only
Stock # KNURLHANDLE
$69.95