Millgrains, Beaders and Knurls- Texturing and setting tools for jewelers.

Millgrain & Beader Handles	Stock#	Price
Standard Handle- Comfortable, palm fitting handle with knurled collet. length 3".	37.767	$7.70
Swivel Tool Handle- Ball shaped wood swivel handle fits palm of hand, making it useful for setting, reaming, tapping, millgrain, beading etc. Comes with two chucks. Chucks open from 0-.089". Length 4".	37.769	$20.99

Swiss Beader Sets- Used to form beads that hold diamonds and other stones in settings. Also used for tightening loose stones. Sets come in protective plastic organizer case and include a handle.

Set of 23 pieces plus handle Stock# 53.160 Price $31.75

Set of 12 pieces plus handle Stock# 53.16001 Price $22.50

Individual Beaders $.94 Each
Size	0	1	2	3	4	5	6	7	8	9	10	11
Stock#	53.161	53.162	53.163	53.164	53.165	53.166	53.167	53.168	53.169	53.170	53.171	53.172
.
Size	12	13	14	15	16	17	18	19	20	21	22	.
Stock#	53.173	53.174	53.175	53.176	53.177	53.178	53.179	53.180	53.181	53.182	53.183	.

Swiss Beading Blocks- For reshaping ends of beading tool punches. Specially hardened steel blocks, perfectly formed and highly polished.
Size	Stock#	Price
12 Hole Round	53.013	$31.50
40 Hole Flat	53.0153	$127.25

Hand Millgrain Tools-

Cup shaped cutters on wheels used to dress up a setting, ring mounting, or any piece of jewelry by forming a decorative bead or fine row of cuts along the edge.

Set in plastic case (sizes 2, 4, 6, 8, 10, 12) plus chuck holding handle	Stock #53.0210	$75.00
Set in hardwood stand (sizes 1-6) plus chuck holding handle	Stock #53.100	$71.85

Individual Millgrains $10.45 Each
Size	1	2	3	4	5	6	7	8	9	10	11	12
Stock#	53.101	53.102	53.103	53.104	53.105	53.106	53.107	53.108	53.109	53.110	53.111	53.112

Lathe Millgrains- Shor lathe millgrain tools are used on a lathe with an SV-12 collect expander and collets to put a millgrain border on the edge of a ring or bracelet. Male tools have a raised bead and leave a beaded imprint on the edge of a ring or bracelet. Female tools are indented and leave a imprinted bead. Rope tools leave a rope like effect. Lathe millgrains pictured below are magnified about 6 times actual size.

See picture to the left (showing lathe millgrain, ring, SV-12 collet expander & collet) for proper size perspective. The standard lathe millgrains are available in standard millgrain diameter, ¼", and also in ½" diameter sizes. Please specify when ordering.

Std. (¼") Lathe Millgrains	½" Lathe Millgrains	"S" Style ½" Lathe Millgrains	Posalux Tool Mtd. Millgrains
Pricing
$74.95	$99.95	$99.95	$99.95

Stock#

M10

M12

M14

Pix

Name

Male Lathe Millgrains

Stock#

F10

F12

F14

Pix

Name

Female Lathe Millgrains

Stock#

CF15

HB1

CF13

Pix

Name

Rope Lathe Millgrains

Raised Bead

Herringbone

Knurl

Florentine Dia.

Posalux Millgrains

Available in all types of millgrains. Same as the std. lathe millgrains but mounted in a Posalux type tool holder so that millgraining can be done in a faceting machine instead of a lathe.

S 400
½" diameter

	The S style lathe millgrains are both larger in diameter and wider that the standard lathe millgrain. In addition to these differences, the teeth of the S style are cut more square, while the standard lathe millgrains have a much more rounded edge. The result is a very unique edging.
The comparison photo above shows an S-400 millgrain on top and a ½" diameter M10 lathe millgrain on the bottom).

S 401
½" diameter (finer teeth)

See also: Lathe Channel Setting Tools

Knurls- Knurls are much wider than millgrains (about 10 mm), and give a frosted look. They are used by hand.
	Sizes Available		Price
	#1- Fine finish	#2- Coarse finish	$75.95
	Handle only		$69.95

Shor International Corporation
*Fine Tools, Equipment and Innovative Products Since 1918* 20 Parkway West, Mt. Vernon, N.Y. 10552 Phone (914) 667-1100 Fax (914) 667-0190
e-mail:	shorinternational@attglobal.net