The Ultimate Micromotor

X50 Ultra-High Torque, Brushless, 50,000 rpm Micromotor

The drawback to most micromotors is the low torque.  No more!-  This new, brushless, ultra-high torque motor and control system provide brute-strength power and smooth control through the 1,000 to 50,000 rpm speed range and completely eliminates carbon brush maintenance.  

New, intelligent microprocessor controls provide fully variable speed via console or foot control, protect the handpiece from damage and display precise rotational speed.  Automatic speed control feature simplifies foot control speed operation.  

Comes complete with brushless handpiece, ³/32" collet, variable speed foot control and accessories. Made in USA.

Foredom High Torque, High Speed Micromotor

1050 High Torque (7.8 N cm), Brushless, 50,000 rpm Micromotor

This new, brushless, ultra-high torque motor and control system provide brute-strength power and smooth control through the 1,000 to 50,000 rpm speed range and completely eliminates carbon brush maintenance.  Runs on either 110V or 220V (50/60 cycle). New, intelligent microprocessor controls provide fully variable speed via console or foot control, protect the handpiece from damage and display precise rotational speed.  Automatic speed control feature simplifies foot control speed operation.  Includes auto cruise, forward, reverse, dial or foot speed control.  Digital display for precise speed and torque settings. Ceramic bearings. Comes complete with brushless handpiece, ³/32" (2.35mm) collet, variable speed foot control and accessories.  Optional ¹/8" collet available ($30).  2 year warrantee.  Made in USA.

This kit is ideal for high speed applications up to 45,000 rpm, including light deburring of cast pieces, bright cutting in jewelry making, and fine detailing in woodcarving. Compared to flex shaft micro motors have much less torque however, the higher speed results in a comparable rate of material removal with a lighter touch. The simple coil cord connection between the handpiece motor and control box is another key advantage. Unlike the "drag" and general restriction in maneuverability you have with a shaft and sheath, micro motors offer much greater freedom of movement.  

1070 Micro Motor Kit Includes:  Control-HP4-9l7, Handpiece with ³/32" (2,35mm) Collet-MH-170, Variable Speed Foot Control-HP4-950,  Handpiece Cradle-HP4-933,  Spare Pair of Motor Brushes, Spare Fuse, Collet Changing Wrenches.

The compact Control has switches on the front for 0n/0ff Power Forward or Reverse Rotation, and Manual or Foot Speed Control. Speed can be adjusted from low to full speed using the dial on the box, or with the foot pedal. An Overload Protector Light turns red and sounds a beeping alarm if  the motor stalls. The back of the control box has a convenient voltage selector switch for operating with either 115 or 230 volt-no need to specify 230 volt when ordering. The control converts AC current to DC current required for the handpiece. The box also has receptacles for the Variable Speed Foot Control and an Optional On/0ff Foot Switch (see below).

Bur changes are quick and easy with a simple twist of the front section of the Handpiece. A Cradle is also supplied for the handpiece when not in use. A selection of collet adapters is available for simplifying changes between accessories with different shank size.

MH-011 Buy Micromotor Reciprocating Handpiece $600.00

MH-011 has a slender, contoured grip and impact adjustment ring for precise hammering work. Operates from G-5,000 strokes per minute.  6½" overall length . 9/16" grip diameter, 1" motor diameter. 13 oz/369 gr. 1.5 amps (115V) .75 amps (230V). CE marked.

Reciprocating Foredom Micromotor for Stone Setting and Engraving