Mandrels for Flex Shaft
Back to: 
Polishing Supplies Gateway|
|
3⁄32" Shank Mandrels |
| Description | Quantity | Stock# | Price | |
 |
General Mandrel Used to adapt most accessories having a " shank. |
Dozen | 43.140 Buy | $30.80 |
 |
Wheel Mandrel, Steel Use with wheels having 1⁄16" holes. No washer |
Dozen | 43.130 Buy | $8.10 |
| Wheel Mandrel, Nickel Plated Steel Use with wheels having 1⁄16" holes. Washer |
Dozen | 43.132 Buy | $8.80 | |
| Wheel Mandrel, Stainless Steel Use with wheels having 1⁄16" holes. Washer |
Dozen | 43.134 Buy | $16.10 | |
 |
Mandrel with Reinforced Shoulder | Dozen | 43.128 Buy | $9.90 |
 |
Threaded Mandrel, Stainless Steel With brass collar. Used with rubber point |
Dozen | 43.126 Buy | $9.50 |
 |
Threaded Mandrel Popular for use with Cratex rubberized abrasives. |
Dozen | 43.124 Buy | $8.10 |
 |
Thread Mandrel, Tapered Short With 3⁄16" screw length |
Dozen | 43.120 Buy | $6.30 |
| Thread Mandrel, Tapered Long With " screw length |
Dozen | 43.122 Buy | $6.30 | |
|
|
" Shank Mandrels |
| Quantity | Stock# | Price | ||
 |
Mandrel for Grinding Wheels, with 1⁄16" Holes Made for wheels that are 1" in diameter, ¼" thick and have a hole size of 1⁄16". |
Dozen | 43.158 Buy | $9.90 |
| Mandrel for Grinding Wheels, with
" Holes Made for wheels that are 1" in diameter,¼" thick and have a hole size of ". |
Dozen | 43.162 Buy | $13.50 | |
 |
Mandrel for Grinding Wheels with
" Holes Ideal for use with Cratex wheels |
Dozen | 43.160 Buy | $13.50 |
| Mandrel for Grinding Wheels, with ¼" Holes | Dozen | 43.164 Buy | $19.80 | |
 |
Mandrel with Reinforced Screw One of our most popular general mandrels |
Dozen | 43.156 Buy | $8.80 |
 |
Threaded Mandrel Popular for use with Cratex abrasives |
Dozen | 43.154 Buy | $8.10 |
 |
Tapered Threaded Mandrel, 3⁄16" Screw Length Use with rubber points |
Dozen | 43.150 Buy | $6.30 |
| Tapered Threaded Mandrel, 3⁄8" Screw Length Use with rubber points |
Dozen | 43.152 Buy | $6.30 | |
¼ Shank Mandrels
| Description | Quantity | Stock# | Price | |
 |
Threaded Mandrel For use with rubber cones |
Each | 43.166 Buy | $3.70 |
 |
Mandrel for Grinding Wheels Will fit wheels with ¼" hole size, up to 3" in diameter and ½" thick. |
Each | 43.168 Buy | $6.30 |
Emery Mandrels
| Quantity | Stock# | Price | |||
 |
Split Mandrel Made for use with emery paper. 2½" long with 3⁄32" shank to fit in handpieces. |
Straight | Dozen | 11.308 Buy | $14.30 |
 |
Tapered | Dozen | 11.309 Buy | $12.10 | |
 |
Wood Arbor Coat with adhesive and roll in abrasive to form 7" polish stick. Has ½" arbor hole for tapered spindle mounting. Made from birch. Also used for holding rings when polishing. |
Dozen | 11.266 Buy | $19.70 | |
| Split Wood Mandrel Slot hold emery paper so it can be wound around mandrel to desired thickness and secured with rubber band. |
Dozen | 11.306 Buy | $19.90 | ||
 |
Inside Ring Split Mandrels For sanding and finishing the inside of rings. An excellent alternative to abrasive band mandrels (see below). Made of stainless steel, the mandrels are machined true and come with rubber bands to hold the emery paper in place. |
¼" | MAN-450.01 Buy | $2.50 | |
| 3/8" | MAN-450.02 Buy | $2.80 | |||
| ½" | MAN-450.03 Buy | $3.50 | |||
| set of all 3 | MAN-450.00 Buy | $9.55 | |||
 |
Snap on Mandrel High quality steel with 3⁄32 " shank. For use with snap-on sanding disks. |
Each | 10.740 Buy | $2.40 | |
|
Abrasive Band Mandrels See also: Abrasive Bands |
|||||
 |
Band Diameter | 3⁄32" Shank | 1⁄8" Shank | Price | |
| ¼" | 6.4 mm | 11.200 Buy | 11.201 Buy | $2.40 | |
| " | 9.5 mm | 11.204 Buy | 11.205 Buy | $2.40 | |
| ½" | 12.7 mm | 11.208 Buy | 11.209 Buy | $2.40 | |
| ¾" | 19.1 mm | 11.211 Buy | $2.40 | ||
 |
Cartridge Roll Mandrels See also: Cartridge Rolls | |||
| Shank Diameter | Use with Rolls | Stock# | Price | |
| " | 1 " long | 11.01280 Buy | $2.10 | |
| " | 1½" long | 11.01281 Buy | $2.10 | |
| 3⁄32" | 1" long | 11.01282 Buy | $3.00 | |
| 3⁄32" | 1½" long | 11.01283 Buy | $3.00 | |
