 |
 |
|
 |
||
 |
||
E-mail: |
Fax: (973) 520-8779 | |
Mandrels for Flex Shaft
Back
to:
Flex Shaft Gateway
Polishing
Supplies Gateway
|
Quantity | Stock# | Price | |||
 |
General Mandrel Used to adapt most accessories having a ⅛" shank. |
Dozen |
|
$28.70 | ||
 |
Wheel Mandrel, Steel Use with wheels having 1/16" holes. No washer |
Dozen |
|
$7.55 | ||
| Wheel Mandrel, Nickel Plated Steel Use with wheels having 1/16" holes. Washer |
Dozen |
|
$8.15 | |||
| Wheel Mandrel, Stainless Steel Use with wheels having 1/16" holes. Washer |
Dozen |
|
$14.99 | |||
 |
Mandrel with Reinforced Shoulder | Dozen |
|
$9.25 | ||
 |
Threaded Mandrel, Stainless Steel With brass collar. Used with rubber point |
Dozen |
|
$8.85 | ||
 |
Threaded Mandrel Popular for use with Cratex rubberized abrasives. |
Dozen |
|
$7.55 | ||
 |
Thread Mandrel, Tapered Short With 3/16" screw length |
Dozen |
|
$5.80 | ||
| Thread Mandrel, Tapered Long With ⅜" screw length |
Dozen |
|
$5.80 | |||
|
Quantity | Stock# | Price | |||
 |
Mandrel for Grinding Wheels,
with
1/16"
Holes Made for wheels that are 1" in diameter, ¼" thick and have a hole size of 1/16". |
Dozen |
|
$9.25 | ||
| Mandrel for Grinding Wheels,
with
⅛" Holes Made for wheels that are 1" in diameter,¼" thick and have a hole size of ⅛". |
Dozen |
|
$12.60 | |||
 |
Mandrel for Grinding Wheels with
⅛" Holes Ideal for use with Cratex wheels |
Dozen |
|
$12.60 | ||
| Mandrel for Grinding Wheels, with ¼" Holes | Dozen |
|
$18.50 | |||
 |
Mandrel with Reinforced Screw One of our most popular general mandrels |
Dozen |
|
$8.15 | ||
 |
Threaded Mandrel Popular for use with Cratex abrasives |
Dozen |
|
$7.55 | ||
 |
Tapered Threaded Mandrel,
3/16"
Screw Length Use with rubber points |
Dozen |
|
$5.80 | ||
| Tapered Threaded Mandrel,
3/8"
Screw Length Use with rubber points |
Dozen |
|
$5.80 | |||
| ¼" Shank Mandrels | Quantity | Stock# | Price | ||
 |
Threaded Mandrel For use with rubber cones |
Each |
|
$3.45 | |
 |
Mandrel for Grinding Wheels Will fit wheels with ¼" hole size, up to 3" in diameter and ½" thick. |
Each |
|
$5.80 | |
| Emery Mandrels | Quantity | Stock# | Price | |||
 |
Split Mandrel Made for use with emery paper. 2½" long with 3/32" shank to fit in handpieces. |
Straight | Dozen |
|
$13.75 | |
 |
Tapered | Dozen |
|
$13.75 | ||
 |
Wood Arbor Coat with adhesive and roll in abrasive to form 7" polish stick. Has �" arbor hole for tapered spindle mounting. Made from birch. Also used for holding rings when polishing. |
Dozen |
|
$18.85 | ||
| Split Wood Mandrel Slot hold emery paper so it can be wound around mandrel to desired thickness and secured with rubber band. |
Dozen |
|
$19.05 | |||
 |
Snap on Mandrel High quality steel with 3/32 " shank. For use with snap-on sanding disks. |
Each |
|
$2.25 | ||
|
Abrasive Band Mandrels See also: Abrasive Bands |
||||||
 |
Band Diameter | 3/32" Shank | 1/8" Shank | Price | ||
| ¼" | 6.4 mm |
|
|
$2.25 | ||
| ⅜" | 9.5 mm |
|
|
$2.25 | ||
| ½" | 12.7 mm |
|
|
$2.25 | ||
| ¾" | 19.1 mm |
|
$2.25 | |||
 |
Cartridge Roll Mandrels See also: Cartridge Rolls | |||
| Shank Diameter | Use with Rolls | Stock# | Price | |
| ⅛" | 1 " long |
|
$2.00 | |
| ⅛" | 1½" long |
|
$2.00 | |
| 3/32" | 1" long |
|
$2.80 | |
| 3/32" | 1½" long |
|
$2.80 | |
About Shor |
New |
On Sale |
Contents & Search Page
© 2012. Shor International Corporation. All rights reserved.