Electric Gravers, Turning Gravers, Lathe Gravers, Burgess Vibro-Graver, Graver Sharpeners, Graver Sets.

Gravers: Sharpeners, Turning Gravers, Electric Gravers
Back to Engraving Gateway Page Sharpening & Truing Stones Also see: Scribers

Turning Graver Sets
		Stock#	Price
	Set of 10 with Handles- For turning or pivoting items on small lathes. Set of ten different shapes made of tools steel with finished ground point	36.800	$79.99
	Set of 6- For turning or pivoting items on small lathes. Set of six graduated sizes made of tools steel with finished ground points. No handles.	36.804	$72.90

Burgess Vibro-Graver- This rugged industrial quality engraving tools makes permanent markings on the hardest steel, glass, plastic, stone, wood, or almost any hard surface. Used extensively by jewelers to make background effects on jewelry. Features a durable, tungsten carbide engraving tip, positive on/off switch and spark free motor that vibrates at 7200 strokes per minute. The calibrated adjustment dial changes length of stroke and depth of mark. A diamond tip is available as an accessory.

110 Volt Model	Stock #36.860	$68.95
220 Volt Model	Stock #36.860X	$68.95
Replacement tungsten carbide tip	Stock #36.862	$6.95
Diamond tip	Stock #36.863	$28.99

	Graver Sharpeners
	Graver Sharpener- Graver is placed in either of two angled openings and rolled over flat oilstone to sharpen. Stock# 36.884 $8.15
	Crocker Pattern Graver Sharpener- Graver can be set to any angle by setting index. Hold graver edge in position while honing on oilstone. Stock# 36.880 $54.99
	Graver Sharpener- Special feature of this sharpener is the elongated shields that hold the graver in an immovable position during the sharpening action. Gravers can be sharpened at any angle. Screw on top locks graver and also serves as a finger rest. Stock# 64.2462 $135.99

GRS Power Hone and Accessories- The GRS Diamond Power Hone grinds tools and gravers quickly, without heat. You get an advanced tool edge that enhances finished work. The Power Hone allows for cleaner scrolls, brighter cuts, more precise beads, finer shading and better details. The diamond wheel sharpens both steel and carbide tools and will make them last longer too. Power Hone does not come standard with sharpening fixture shown in the picture below. Reversible.

Item

Description

Stock#

Price

Power Hone (110v)

w/600 grit wheel & adaptor

G01-525B

$379.00

Power Hone (220v)

w/600 grit wheel & adaptor

G01-543B

$379.00

260 Grit, 5" Diamond Wheel

Coarse

G02-138

$97.00

600 Grit, 5" Diamond Wheel

Medium

G02-055

$89.00

1200 Grit, 5" Diamond Wheel

Fine

G02-139

$89.00

Ceramic Lapping Wheel- For mirror finish

Requires diamond spray

G02-415

$99.70

Diamond Spray ï¿½ Micron

For use with Lapping Wheel

G02-752

$23.90

Diamond Spray ï¿½ Micron

For use with Lapping Wheel

G02-753

$23.90

Diamond Spray 1 Micron

For use with Lapping Wheel

G02-754

$23.90

Diamond Spray 3 Micron

For use with Lapping Wheel

G02-755

$23.90

Graver Sharpening Fixture

Shown in picture left

G03-100

$92.00

Graver Sharpening Fixture

Dual Angle Calibration

G03-570

$198.00

Quick Wheel Change Adapter-

Change wheels in 2 seconds. Replaces the standard wheel knob. To change wheels, you just lift them on and off...even when it's running.
Stock# G01-838 $49.00

Shor International Corporation
*Fine Tools, Equipment and Innovative Products Since 1918* 20 Parkway West, Mt. Vernon, N.Y. 10552 Phone (914) 667-1100 Fax (914) 667-0190
e-mail:	shorinternational@attglobal.net