E-mail: Fax: (973) 520-8779

About Shor Find Over 20,000 Products  My Cart Place an Order
 

Swiss 3-Square Files
All Files are double cut (cross cut) unless otherwise noted

Back to wpe7.jpg (1231 bytes) Files Gateway Page

3 Square
Gradually tapered. Cut and usable to the point.
Cross Section Length Diameter Cut 00 Price Cut 0 Price Cut 1 Price Cut 2 Price Cut 4 Price
4" 9/32"
31.366 Buy
 $18.55
31.367 Buy
 $19.70
31.368 Buy
 $20.75
31.369 Buy
 $21.35
31.370 Buy
 $24.95
6" 3/8"
31.371 Buy
 $22.10
31.372 Buy
 $23.30
31.373 Buy
 $24.35
31.374 Buy
 $25.15
31.375 Buy
 $29.35
8" ¾"
31.376 Buy
 $30.35
31.377 Buy
 $32.20
31.378 Buy
 $33.50
31.379 Buy
 $34.60    

 

3 Square Slim & Short
Gradually tapered. Cut and usable to the point. Same as 3-square except thinner, for working in small areas.
Length Width Cut 0 Price Cut 2 Price
6" 5/16"
31.381 Buy
 $25.45
31.382 Buy
 $27.30

 

Valtitan 3-Square Files
For platinum, stainless steel, exotic plastics and other hard to file materials.  The hardest surface known
 Rockwell hardness 72HRc.  Best performance on hard-to-file surfaces. Cut 0 has blunt end.  Cut 2 has pointed end.

 Little or no clogging, a simple knock is enough to remove the chips.  Highly resistant to corrosion.  Swiss.
Length Diameter Cut 0 Price Cut 2 Price
6" 3/8"
30.261V Buy
 $37.95
30.262V Buy
 $40.50
8" ½"
30.264V Buy
 $51.55
30.265V Buy
 $55.75

 

American Pattern 3-Square
The three square file is the file of choice by machinists, when filing angles more acute than 90 degrees, for cleaning out corners and filing taps and cutters.  This triangular file is taped to the point.  It can get into corners other files cannot. Swiss made.

Cross Section Length Diameter Bastard Cut (00) Price per Dz. 2nd Cut (0) Price per Dz. Smooth Cut (2) Price per Dz.
4" 5/16"
32.455S Buy
 $108.00
32.45501 Buy
S		 $118.00
32.45502 Buy
S		 $119.99
6" 15/32"
32.456S Buy
 $131.99
32.460S Buy
 $147.99
32.464S Buy
 $148.99
8" 5/8"
32.457S Buy
 $157.80
32.461S Buy
 $178.99
32.465S Buy
 $187.99
10" ¾"
32.458S Buy
 $195.99
32.462S Buy
 $212.99
32.466S Buy
 $331.99
12" 1"
32.359 Buy
 $116.99
32.463S Buy
 $345.99    

 

Die Sinkers' 3-Square
Overall length 5½". Length of cut 3½".
Cut 0 Price Cut 2 Price
31.440 Buy
 $25.85
31.441 Buy
 $29.65

 

American Pattern Taper Saw, Single Cut
The Taper Saw file is a triangular, single cut file designed for filing a variety of saws with 60 degree teeth.  Tapered toward a point, this file has cut edges for filing gullets between saw teeth.  Swiss made. Sold by dz only  

Regular Width

Slim Width
Extra Slim Width
Double Extra Slim Width
Length  Regular
Width		 Stock# Price Slim
Width		 Stock#   Price Extra Slim
Width		 Stock# Price Double-Extra
Slim Width		 Stock# Price
4" 5/16"
32.431S Buy
 $56.99 7/32"
32.438S Buy
 $48.99 3/16"
32.445S Buy
 $53.99      
5" 5/16"     9/32"
32.439 Buy
 $25.99 15/64"
32.446S Buy
 $51.99 3/16"
32.450s Buy
 $74.99
6" 15/32"
32.433S Buy
 $75.99 11/32"
32.440S Buy
 $55.99 9/32"
32.447S Buy
 $54.99 7/32"
32.451s Buy
 $68.99
7" 17/32"
32.434S Buy
 $76.99 13/32"
32.441S Buy
 $64.99 5/16"
32.448S Buy
 $64.99 ½"
32.452s Buy
 $72.99
8" 19/32"
32.435S Buy
 $96.99 15/32"
32.442S Buy
 $76.99 13/32"
32.449S Buy
 $76.99 5/16"
32.453s Buy
 $83.99
10" 23/32"
32.436 Buy
 $56.99 5/8"
32.443 Buy
 $54.99            

 

Habilis 3-Square  Files
For the "in-between" jobs- bigger than a needle file but smaller than a standard file. Length of cut is 4" with an overall length of 8�".
Width Cut 00 Price Cut 1 Price
3/8"
33.828 Buy
 $17.20
33.829 Buy
 $17.20

 

3-Square Needle Files 
Knurled Handles

 
Plastic Handles
Length Cut 0 Price Cut 2 Price Cut 4 Price Cut 6 Price Length Cut 0 Price Cut 2 Price Cut 4 Price
10 cm.
31.630 Buy
 $14.45
31.631 Buy
 $14.45         10 cm.
30.630 Buy
 $16.05
30.631 Buy
 $16.05    
14 cm.
31.633 Buy
 $11.70
31.634 Buy
 $11.70
31.636 Buy
 $12.60     14 cm.
30.633 Buy
 $13.30
30.634 Buy
 $13.30
30.636 Buy
 $14.25
16 cm.
31.638 Buy
 $12.40
31.640 Buy
 $12.40
31.642 Buy
 $13.65
31.643 Buy
 $17.00 16 cm.
30.638 Buy
 $13.95
30.640 Buy
 $13.95
30.642 Buy
 $15.25
20 cm.
31.645 Buy
 $15.15
31.647 Buy
 $15.15
31.649 Buy
 $16.95
31.650 Buy
 $32.20              

 

Valtitan 3-Square Needle Files
For platinum, stainless steel, exotic plastics and other hard to file materials.  The hardest surface known
 Rockwell hardness 72HRc.  Best performance on hard-to-file surfaces.  Little or no clogging, a simple knock is enough to remove the chips.  Highly resistant to corrosion.  Swiss.

Length Diameter Cut 00 Price Cut 0 Price Cut 2 Price
16 cm 5/16"
30.112v Buy
 $20.10
30.113V Buy
 $20.10
30.114V Buy
 $20.10

 

Single Cut 3 Square Needle Files
Single cut files, in addition to being much more economical than the standard double cut,  have an advantage that they do not clog as easily as double cut files.

Length Cut 4 (fine) Price
14 cm.
33.865 Buy
 $5.45

 

Economy 3-Square Needle Files
Well made, yet economical , Swiss needle files, made of chrome alloy steel.  Cut portion is 3" long.

Length Medium Price per Dz. Fine Price per Dz.
14 cm.
33.900 Buy
 $55.80
33.901 Buy
 $62.60

 

3-Square Escapement Files
Also known as square handled needle files, these precision files have a length of cut of about 2".

Length Cut 0 Price Cut 2 Price Cut 4 Price Cut 6 Price Cut 8 Price
14 cm.
31.760 Buy
 $18.50
31.761 Buy
 $18.55
31.762 Buy
 $20.20
31.763 Buy
 $23.55
31.764 Buy
 $24.65

 

3-Square Slim & Short Escapement
Also known as square handled needle files, these precision files have a length of cut of about 1�".

Length Cut 2 Price Cut 4 Price Cut 6 Price
14 cm.
31.766 Buy
 $18.55
31.767 Buy
 $20.20
31.768 Buy
 $23.55