Shor International - Quadrants- Dividing quadrants for faceting machines and ring drilling

Quadrants & Dividers

Quadrants

Price

Ring Drilling Quadrant
This tool mounts on virtually any drill press and is used in conjunction with a drill press and ring collets to:

Do precise channel cutting in wedding bands
Cut precisely spaced settings in wedding bands for stones
Drill precisely spaced holes in wedding bands

Although very similar in appearance to a faceting quadrant, the Shor Ring Drilling Quadrant is used with a drill press, not a faceting machine. See also Channel Setting Tool.

$895.00

Motorized Ring Quadrant

Tilting Ring Quadrant
Like the CoFacet quadrant, featured below, except tilting.

CoFacet Ring Quadrant less Shaft

$2,195

CoFacet Ring Quadrant with Shaft

$2,495

M3 Ring Quadrant

Flat Tilting Divider

995.00

Oval Turning Divider Assembly

995.00

Decentering Brace

Deluxe Flat Vertical Divider Assembly

638.00

	Quadrant Parts	Price
	Posalux Autodivider Main Shaft with Bushing
	Divider Plate, Old Style, for Posalux Divider 150 x 110 mm
	SV-12 Collet Expander The Shor V Collet Expander is a marvelous little tool that allows an ordinary lathe to be used to texture and cut wedding bands and bangle bracelets. If you plan to do lathe millgraining or diamond polishing, this tool is literally indispensable. With the SV 12, a set of collets and a lathe, a whole world full of textures opens up: Airscribing (laser finishes, bark finishes etc.) lathe millgraining Diamond polishing An almost infinite range of textures and finishes Finishes that were possible before but did not yield consistent or uniform results are now consistent, uniform and much more easily and quickly accomplished.	$295.00
	Gears for Std. Ring Quadrant, 32-60 Tooth Toothed portion diameter approximately 35 mm. Specify number of teeth required when ordering gears.	$175.00
	Gears for M1 Ring Quadrant, 72-120 Tooth Toothed portion diameter approximately 40 mm. Specify number of teeth required when ordering gears.	$175.00
	Gears for M-10, M11 Ring Quadrants, 72 & 120 Tooth Toothed portion diameter approximately 40 mm. Specify 72 or 120 tooth when ordering gears.	$175.00
	Gears, Dividing, for SV-12, 60, 90, 96 Tooth Toothed portion diameter approximately 80 mm. Specify 60, 90, or 96 tooth when ordering gears.	$175.00
	Gears, Brass, for Posalux 60 mm diameter, 12mm hole	$175.00
	Ring Collet Motorizing Assembly Brass Gear Gear diameter 52 mm. Center hole 18 mm diameter.	$90.00
	Mounting Bracket for Motorized Ring Quadrant 62 mm x 45 mm	$25.00
	Ring Quadrant Mounting Bolts, TD- To attach the quadrant to the table	$25.00
	TD Pawls	$85.00
	Mounting Base for TD Pawls	$75.00
	M1 Pawls	$100.00
	TD Divider Handle 45 mm overall length	$5.00
	Operating Handles, SV12 Quad, TD 72 mm to 110 mm length	$15.00
	Release Levers for TD Automatic Flat Divider 110 mm long
	Operating Handle, Old Style for Posalux and M3 Ring Quadrants	$20.00
	Operating Handle for M11 Ring Quadrants	$25.00
	End Plates for TD Ring Quadrant Plates range in size from 30 mm long to 80 mm long	$75.00
	Ring Quadrant Divider Selection Gauge for Posalux	$85.00
	Oval Turning Divider Head
	Oval Turning Divider Base




	E-mail:	Fax: (973) 520-8779