 |
Precision Lathe- For watchmakers,
clockmakers and jewelers. A precision lathe at an affordable price. Comes
with a 3 jaw chuck, adjustable tool tailstock and a fully adjustable tool
holder/slide rest. Tailstock is supplied with a dead center but can be
easily fitted with a live center. An 8 mm watchmaker collet holder for WW
pattern collets is available as well as precision collets and collet
holder. The tailstock and headstock can both hold any of the available
chucks (3 jaw, 4 jaw etc.) or an 8 mm drill chuck. A 2 speed motor and 4
different motor pulley ratios allow for 8 spindle speeds: 130, 200, 350,
560, 920, 1,500, 2,450, 2,450 and 4,000 RPM's. Multiple speeds plus high
stability make this lathe perfect for texturing,
lathe millgraining, wedding ring tube cutting and channel
cutting Most of these processes require the use of an
SV-12 collet expander and
collets. ). Comes mounted on a sturdy base.
Stock# LA41030 Price $795.00 |
 |
Benzinger Lathe, Model 3-D-
For diamond polishing the insides and edges of wedding rings. Polishes
the edges and chamfers the corners in one operation. Single lever for
starting, stopping and braking. High precision anti-friction bearings.
Transversal slide with ring size Vernier scale- simply set for the ring
size. Spray mist cooling device. Set of 37 collets on peg board. 3
diamond tools included. 5 speeds from 700 to 2,900 rpm. Motor
1/2 HP, 220V, 3 phase, 50/60 cycle
Dimensions 40" wide x 50" high x 22" deep
Net weight 450 lbs
Ship weight 500 lbs. |
 |
Benzinger Lathe,
Model KKsH- For diamond polishing the outsides of wedding
rings. For making D-shape rings from flat rings with optional radius
turning accessory. Single lever for starting, stopping and braking. High
precision bearings optionally available. Spray mist cooling device. Set of
25 collets on peg board. 2 diamond tools included. 5 speeds from 700 to
2,900 rpm. Optional Radius Turning Slide Rest makes D-shape rings from
flat rings. Optional devices for HiLo rings, square rings and tapered
rings.
Motor: 1/2 HP, 220V, 3 phase, 50/60 cycle
Dimensions: 40" wide x 50" high x 22" deep
Net Weight: 450 lbs.
Ship Weight: 500 lbs.Benzinger Radius
Turning Slide Rest for Model KKsH- For doming
flat rings. |
 |
|
|
Benzinger Lathe, Model R3-D-
For doming and diamond polishing the insides and edges of wedding rings.
Finishes the insides of wedding rings with a domed surface. Chamfers the
corners as it diamond polishes the edges. High precision anti-friction
bearings. Transversal slide with ring size Vernier scale- simply
set for the ring size. Spray mist cooling device. Set of 37
collets on peg board. 3 diamond tools included. 5 speeds from
700 to 2,900 rpm.
Motor
1/2 HP, 220V, 3 phase, 50/60 cycle
Dimensions 40" wide x 50" high x 22" deep
Net weight 450 lbs
Ship weight 500 lbs. |
 |
Benzinger Tubing Cut-Off Lathe-
For making wedding ring blanks from tubing. Rapid action cutting of
tubing. High precision quick-change width gage. Automatic mist cooling.
Cuts tubing up to 25 mm o.d. Motor
1 HP, 220V, 3 phase, 50/60 cycle
Dimensions 36" wide x 16" high x 26" deep
Net weight 400 lbs
Ship weight 450 lbs. |