Shor International - Faceting Collets and Blanks

Faceting Collets and Blanks

Ring Collet Sets

Standard Brass Ring Collet Sets, Inside Holding
For lathe & faceting machine.

Set of 23, sizes 4-15 by ½ size increments, Standard Collets- $495
Set of 23, sizes 4-15 by ½ size increments, Std. Collets with Stand- $650

Set of 23, sizes 4-15 by ½ size increments, Tapered Collets- $495
Set of 23, sizes 4-15 by ½ size increments, Tapered Collets with Stand- $650

Set of 23, sizes 4-15 by ½ size increments, High/Low Collets- $595
Set of 23, sizes 4-15 by ½ size increments, High/Low Collets with Stand- $750

Brass Lathe Collet Set, Outside Holding
For lathe only.

37 pieces $999 with stand

wpe1C.jpg (1946 bytes)

Standard Brass Ring Collets
$39 each

Hi-Low Brass Ring Collets
Hi-Low ring collets are quite different from standard collets.

When used on a lathe (with an SV-12 ring collet expander), they can be used to shape an ordinary ring in a Hi-Low ring (see picture to left).

When used with a ring drilling quadrant, a faceting machine or a lathe, they can be used to channel cut a Hi-Low ring.

When used with a faceting machine, they can be used to bright cut a Hi-Low ring.

$49 each

wpe1D.jpg (4007 bytes)

Ring & Disk Blanks
Domed & flat. Used to experiment with styles without the cost of cutting gold. Also excellent for learning.

Price $9.95 per dozen of a style.

wpe27.jpg (3795 bytes)

Bracelet Blanks
$3.95 each.

Moyas Lathe Brass Collets, Flat Work, Type A

Moyas Lathe Brass Collets, Flat Work, Type B

Drawstems and Cone for use with Watchcase Collets
This item functions in a manner similar to a drawbar combined with an SV-12 collet expander. When drawn back, it causes the watch case collet to expand. Photos at left show drawstem and cone side by side with a collet and also inserted into the collet. Collet not included in price. See collets below.