E-mail: Fax: (973) 520-8779

About Shor Find Over 20,000 Products  My Cart Place an Order
 

Small Casting Machines
Back to:    wpe1.jpg (1321 bytes)  Casting Gateway

Vacuum Investing & Casting Machine
Vacuum invests and also vacuum casts perforated flasks. Machine dimensions are 23"W x 11"D x 13½" H. Investing table is 10½" x 10½". Bell jar is 9" diameter and 8" high.
120 Volt Machine
21.800G 1.800G&qty=1">Buy
 $1,279
220 Volt Machine  50/60 cycle
21.800GX 1.800GX&qty=1">Buy
 $1,279
100%">
Replacement Part Stock# Price   Replacement Part Stock# Price
Adapter plate for 3" flasks
21.802 Buy
 $71.30   Red Silicon flask Seal for 4" flask
21.814 Buy
 $12.45
Adapter plate for 4" flasks
21.803 Buy
 $78.10 Red Silicon flask Seal for 5" flask
21.817 Buy
 $19.99
Vacuum Pump Oil (1 gallon)
21.811 Buy
 $44.10 Bell Jar
21.818 Buy
 $118.99
Vacuum Pump Oil (1 quart)
21.808 Buy
 $16.30 Melting dish w/handle
22.791 Buy
 $25.25
Black Investing Gasket
21.810 Buy
 $22.40 Melting dish only
22.793 Buy
 $12.40
Red Silicon flask Seal for 3" flask
21.813 Buy
 $9.25      

 

Centrifugal Casting Machines
Long Arm Centrifugal Casting Machine

Takes flasks up to 3½" in diameter and 5" high. The long 223/8" arm provides the extra force needed for heavier casts. 

Comes with balance weights and cradle for 2½" diameter flasks. The recommended crucible is the 12 ounce size.

Casting Machine Only
22.365G Buy
 $574.85
Casting Machine w/Accessories as shown
22.366G Buy
 $635.75
Short Arm Centrifugal Casting Machine

Takes flasks up to 3½" in diameter and 2½" high. Comes with balance weights, crucible, 3 flasks, 3 flask cradles, 3 Sprue bases and flask tongs. Designed to be used with Wesgo crucibles.

Casting Machine w/Accessories as shown       Stock#  

22.361G Buy
       $629
Long Arm Conversion Kit
Converts the short arm machine into the long arm type. Comes complete with balance weights and cradle for flask.   22" overall length.

Casting Machine w/Accessories as shown       Stock#  

22.367G Buy
       $290.80

Drum for Centrifugal Casters
Helps protect the operator against accidental metal spilling from the whirling crucible. For use with either regular or long arm machines. Made of steel with baked enamel finish. Base is drilled for attachment to bench. Base measure 24" x 24". The drum is 23½" wide by 11½" high. Comes with instruction for assembly. Optional cover provides extra protection.
Drum Only
22.390 Buy
 $99.15
Cover Only
22.391 Buy
 $58.80
Drum & Cover
22.392 Buy
 $158.60

 

Shor Platinum Casting Machine For Torch Melted Platinum

Price: $1295
Platinum "freezes" very quickly, so the machine that casts it must throw the metal into the flask very quickly. The Shor Platinum Casting Machine uses both high torque springs and a vertical centrifugal design for rapid starting and casting speed. Its precision construction will deliver years of trouble-free performance.

A question often asked is "Why are platinum casting machines so expensive compared with horizontal gold casting machines?". The primary reason is that, because of the extremely high speed and torque, they must be built to tolerances much finer than gold casting machines (if they weren't, they'd shake themselves apart). The Shor Platinum Casting